Sewing Split Embroidery Patterns - Baby Lock Aventura BLMAV Instruction And Reference Manual

Embroidery Applications

Sewing split embroidery patterns

Split embroidery patterns created with Palette Ver.7 or later
can be sewn. With split embroidery patterns, embroidery
designs larger than the embroidery hoop are divided into
multiple sections, which combine to create a single pattern
after each section is sewn.
For details on creating split embroidery patterns and for more
detailed sewing instructions, refer to the Instruction manual
included with Palette Ver.7 or later.
The following procedure describes how to read the split
embroidery pattern shown below from USB flash drive and
embroider it.
a
Insert the USB flash drive containing the created split
embroidery pattern, and then select the split
embroidery pattern to be embroidered.
• For details on recalling patterns, refer to "Recalling
from USB flash drive" on page E-34.
→ A screen appears so that a section of the split
embroidery pattern can be selected.
b
Select section to be embroidered and press
• Select the sections in alphabetical order.
• A maximum of 5 sections can be displayed in one
page. If there are 6 or more sections in the pattern,
press or to display the previous or next page.
c
If necessary, edit the pattern, and press
E-22
d
Press
• For details on editing patterns, refer to "Editing All
Patterns" on page E-15.
Memo
• Press
e
Press the "Start/Stop" button to embroider the pattern
section.
f
When embroidering is finished, the following screen
appears. Press
→ A screen appears so that a section of the split
embroidery pattern can be selected.
g
Repeat steps
remaining sections of the pattern.
.
.
.
to rotate the pattern.
.
b f
through to embroider the