Confirming The Pattern Position; Checking The Pattern Position; Previewing The Selected Pattern - Baby Lock Aventura BLMAV Instruction And Reference Manual

Confirming the Pattern Position

The pattern is normally positioned in the center of the
embroidery frame. If the pattern needs to be repositioned
for better placement on the garment, you can check the
layout before starting embroidery.

Checking the pattern position

The embroidery frame moves and shows the pattern position.
Watch the frame closely to make sure the pattern will be sewn
in the right place.
Press on the embroidery settings screen.
a
From , press the key for the position that you
b
want to check.
1 Selected position
→ The needle will move to the selected position on the
pattern.
Memo
• To see the entire embroidering area, press
The embroidery frame moves and shows the
embroidery area.
Note
• Needle should be in the raised position before
pressing
message will appear "The needle is down. Press
the needle position button to raise the needle."
When needle is raised this message will then
disappear.
Press
c

Previewing the selected pattern

Press
a
→ An image of the pattern as it will be embroidered
appears.
Press
b
preview.
• Frames displayed in light gray cannot be selected.
1
• Press
• The pattern can be sewn as it appears in the
following display.
.
■ Frame sizes displayed on screen
Display
Extra large embroidery frame
26 cm × 16 cm (10-1/4 inches × 6-1/4 inches)
Large embroidery frame
18 cm × 13 cm (7 inches × 5 inches)
Medium embroidery frame (sold separately with
some models)
10 cm × 10 cm (4 inches × 4 inches)
Small embroidery frame (sold separately with some
models)
2 cm × 6 cm (1 inch × 2-1/2 inches)
Press
c
Confirming the Pattern Position
otherwise the following error
.
.
to select the frame used in the
to enlarge the image of the pattern.
Frame type and embroidering area
to return to the original screen.
Basic operations B-63
B