Table of Contents
Advertisement
EMBROIDERY APPLICATIONS
c
Remove the embroidery frame from the embroidery
unit, and cut around the outside of the stitches of the
fabric for the appliqué piece. And then, reattach the
embroidery frame to the embroidery unit.
Note
• Do not remove the fabric from the embroidery
frame to cut it. Also, do not pull or push on the
fabric. Otherwise, the fabric may loosen in the
frame.
d
Select the satin stitch frame pattern of the same shape
as the appliqué and embroider the satin stitch pattern
to create an appliqué.
Embroidering Split Embroidery Patterns
Split embroidery patterns created with Palette Ver. 7 or
later can be embroidered. With split embroidery
patterns, embroidery patterns larger than the
embroidery frame are divided into multiple sections,
which combine to create a single pattern after each
section is embroidered.
For details on creating split embroidery patterns and for
more detailed embroidery instructions, refer to the
Instruction guide included with Palette Ver. 7 or later.
148
a
Insert the USB media containing the created split
embroidery pattern, and then select the split
embroidery pattern to be embroidered. (page 146)
b
Select section
to be embroidered.
c
Press
.
Advertisement
Table of Contents
