Registering Daily Transfer Schedule; Daily Transfer Schedule]; Setting Transfer Schedule [Transfer Setting - Transfer Schedule Setting]; Transfer Setting – Registering Daily Transfer Schedule] - Aiphone IS Series Setting Manual

Registering daily transfer schedule

[Transfer setting – Registering daily
transfer schedule]
You can set the schedule for transferring calls to other master
stations automatically. The schedules registered on this setting
are used when making a transfer setting on a master station.
Up to 2 daily schedules can be registered.
1
Click Registering daily transfer schedule in the
table of contents.
2
[Schedule number]:
Select the schedule number DT1 or DT2 from the
pull-down menu.
3
[Schedule name]:
Enter the name of daily schedule.
4
[Call transfer time]:
Set the [Start time (hour and minute)] and [End time
(hour and minute)] of transferring.
5
Click
Temporarily stored
results temporarily.
If you wish to cancel the setting results you have made,
*
click a title in the table of contents or "Refresh" in the
web browser menu.
20
to save the current setting
Setting transfer schedule
[Transfer setting – Transfer schedule setting]
You can set a weekly transfer schedule and individual daily
schedule.
The settings can be made 1 year ahead.
*
1
Click Transfer schedule setting in the table of
contents.
2
Make the settings by clicking
and
Individual schedule
corresponding window.
Individual schedule
*
day is clicked on the calendar.
3
Make the settings in the displayed window(s).
See the detailed instructions for K or L on the
next page.
4
After the setting is finished on the corresponding
window, click to close the window.
Close
Calendar and setting status can be checked for the
selected month.
The registered daily transfer schedules are
identified by colors and shown on the calendar.
5
Click
Temporarily stored
results temporarily.
If you wish to cancel the setting results you have made,
*
click a title in the table of contents or "Refresh" in the
web browser menu.
Weekly schedule
respectively to open the
K
L
should be clicked after the target
to save the current setting