MAINTENANCE
This section describes the use of functions for the system maintenance. These functions are available on the web server.
Initializing the system [Initialization]
You can reset the system settings to factory default.
1
Access the web browser and log in.
(→P. 9)
2
Click
Initialization in the table of contents.
3
Click
.
Initialization
Downloading system log [System log]
You can acquire the system operation log.
1
Access the web browser and log in.
(→P. 9)
2
Click
System log in the table of contents.
3
Click
to acquire the log from the system.
Download
4
Confirm the log, and save it as needed.
NOTE:
The log is overwritten constantly from the oldest records.
Updating the firmware [Firmware update]
n Downloading updated firmware data
Please access our web page at http://www.aiphone.net/ and
download the firmware data on the PC to update the system.
For the download procedure, see the instructions on our web
page.
1
Access the web browser and log in. (→P. 9)
2
Click
Firmware update in the table of contents.
3
Click
.
Update
Another window opens.
4
Click
and select the target firmware.
Browse...
5
When the firmware is displayed in the window, click
Upload
.
The firmware is uploaded on the PC, and then updating the
firmware begins.
When "Update firmware." is displayed, the update process
is complete.
NOTE:
If the power is turned off while it is writing, the product will
malfunction.
NOTE:
If the update fails, try again.
Referring to the troubleshooting guide
[Troubleshooting]
1
Click
Troubleshooting.
The following information appears in the window.
•
Information about the online-help that you can refer to
when trouble occurs in setting the system.
•
Supported characters and symbols
23