Making Network Settings [Network Setting]; Setting The Administrator Id And Password [Administrator Setting] - Aiphone IS Series Setting Manual

The following shows the setting procedure for the items of each title.
Refer to "SETTING LIST" (→P. 4-7) for details about the settings. Make the settings by also referring to the on-screen instructions.

Making network settings [Network setting]

Make the settings for network according to your
requirements.
1
Click Network setting in the table of contents.
2
Make the settings on the following items displayed in
the setting window.
Selecting the network setting method
Set a (static) IP address to this unit. Select the method for
acquiring a (static) IP address between [DHCP] and [Static
IP Address].
• [DHCP]:
Check this when you will acquire an IP address with
DHCP.
A DHCP server (or a router) is required to acquire
*
an IP address with DHCP. A router may not have
the setup function depending on some models. For
information about setting a router, see the instruction
manual for the router.
• [Static IP Address]:
Check this when you do not use a DHCP server (or
a router) or connect the PC to the central control unit
directly, and then enter the static IP address and subnet
mask.
It is required to enter the static IP address and
*
subnet mask.
• [Unit name]:
Enter a name for this unit. (This name will not be used
when operating the system.)
NOTE:
The items that cannot be changed or selected are grayed out.
3
Click
Temporarily stored
results temporarily.
If you wish to cancel the setting results you have made,
*
click a title in the table of contents or "Refresh" in the
web browser menu.
to save the current setting
Setting the administrator ID and password
[Administrator setting]
We recommend that you change the administrator ID and
password from default to unique ones for security purposes.
"aiphone" is preset as the default for both ID and password.
*
1
Click Administrator setting in the table of contents.
2
Make the settings on the following items displayed in
the setting window.
• [New administrator ID]:
Enter the new ID.
• [Current Password]:
Enter the current password.
•
[New Password]:
Enter a new password.
•
[New Password (Re-type)]:
Enter the new password again.
3
Click
Temporarily stored
results temporarily.
If you wish to cancel the setting results you have made,
*
click a title in the table of contents or "Refresh" in the
web browser menu.
to save the current setting
11