Maintenance; Initializing The System [Initialization]; Downloading System Log [System Log]; Updating The Fi Rmware [Firmware Update] - Aiphone IS SERIES Local System Setting Manual

MAINTENANCE

This section describes the use of functions for the system maintenance. These functions are available on the web server.

Initializing the system [Initialization]

You can reset the system settings to factory default.
1
Access the web browser and log in.
(→P. 9)
2 Click Initialization in the table of contents.
3
Click .
Initialization

Downloading system log [System log]

You can acquire the system operation log.
1 Access the web browser and log in.
(→P. 9)
2
Click System log in the table of contents.
3
Click to acquire the log from the system.
Download
4
Confi rm the log, and save it as needed.
NOTE:
The log is overwritten constantly from the oldest records.
Updating the fi rmware [Firmware update]
■ Downloading updated fi rmware data
Please access our web page at http://www.aiphone.net/ and
download the fi rmware data on the PC to update the system.
For the download procedure, see the instructions on our web
page.
1 Access the web browser and log in. (→P. 9)
2
Click Firmware update in the table of contents.
3
Click .
Update
Another window opens.
4
Click and select the target fi rmware.
Browse...
5 When the fi rmware is displayed in the window, click
Upload
.
When "Update fi rmware." is displayed, the update process
is complete.
NOTES:
If the power is turned off while it is writing, the product will
•
malfunction.
The system may not operate normally while updating the
•
fi rmware.
NOTE:
If the update fails, try again.
Referring to the troubleshooting guide
[Troubleshooting]
1 Click Troubleshooting.
The following information appears in the window.
• Information about the online-help that you can refer to
when trouble occurs in setting the system.
• Supported characters and symbols

Registering your system [Registration]

1
Click Registration in the table of contents.
2
Click Register to open the registration window, and
then register your system on the window.
NOTE:
The central control unit (IS-CCU) must be connected to the IP
network to register your system.
23