Station Information; Network Settings - Aiphone IXG Series Quick Start Programming Manual

Gateway Registration
If the system contains Mobile Apps, the Gateway (IXGW-GW) is required. To add the Gateway to the system,
select Enable, then optionally edit its Station Name, and review the other settings. Once configured, click
Save .
Gateway Selection
Use the drop-down menu under Gateway Number to select the Gateway added in the previous step.

Station Information

Identification
Edit the Station Number and Name for each station in the system. The Station Name and Number are
typically only seen by stations within the same Unit for internal communication, but it is recommended to give
custom names to any Entrance or Door stations.
ID / Password
(Optional)
Edit the Admin ID and Password for each station, as well as optionally create an ONVIF and RTSP ID and
Password for each station. It is recommended that the Admin ID and Password are not adjusted once
set.

Network Settings

IP Address
From the side menu, expand Network Settings and select IP Address. Each station can be manually
assigned an IP address, or click Batch IP Address Configuration near the top of the screen to enter an IP
address range to automatically assign all stations.
For systems with the IXGW-GW Gateway Adaptor, a Default Gateway must be added for the adaptor,
and optionally for all other stations. Consult the Network Administrator for more information if needed.
DNS
For systems with the IXGW-GW Gateway Adaptor, a DNS Address is required for the adaptor, and
optionally for all other stations. Consult the Network Administrator for more information if needed.
NTP
It is recommended to Enable and configure NTP settings for each station when possible. For systems with
the IXGW-GW Gateway Adaptor, it will have NTP enabled and an Aiphone NTP server address set by
default. Adjusting this default server address is possible, and recommended for sites with their own server.
6 | IXG Quick Start Programming Guide