Motorola MC67 Integrator Manual page 81

4 Under Keystroke Output, touch Advanced data formatting.
5 Touch Enable.
6 Touch Rule0.
7 Touch Criteria.
8 Touch String to check for.
9 In the Enter the string to check for text box, enter 129 and then touch OK.
10 Touch String position.
11 Change the value to 0.
12 Touch OK.
13 Touch String length.
14 Change value to 12.
15 Touch OK.
16 Touch Source criteria.
17 Touch Barcode input.
18 Touch All decoders enabled to disable all decoders.
19 Touch Code 39.
20 Touch
three times.
21 Touch and hold on the Send remaining rule until a menu appears.
22 Touch Delete action.
23 Touch .
24 Touch New action.
25 Select Pad with zeros.
26 Touch the Pad with zeros rule.
27 Touch How many.
28 Change value to 8 and then touch OK.
29 Touch
three times.
30 Touch .
31 Touch New action.
32 Select Send up to.
33 Touch Send up to rule.
34 Touch String.
35 In the Enter a string text box, enter X.
36 Touch OK.
37 Touch
three times.
38 Touch .
39 Touch New action.
40 Select Send char.
41 Touch Send char rule.
42 Touch Character code.
43 In the Enter character code text box, enter 32.
44 Touch OK.
45 Touch
.
DataWedge Configuration | 81
MN000116A02-A | May 2015