Motorola MC67 Integrator Manual page 134

134 | Application Deployment
• Log file count - Specifies the number of log files to keep and rotate through. Each log file is subject to the max
log size option.
• Max log size - Specifies the maximum size, in kilobytes, of an individual log file.
• Output - The logcat plug-in outputs a series of text files in accordance with the configuration. The files contain
the output of the logcat buffer flushed at the specified interval.
PushPullClient Plug-in
The PushPullClient plug-in is designed to automatically push log files to a remote FTP server on a regular basis. It
also has the capability to pull a remote file from the FTP server to a local directory on the device to automatically pull
down a new configuration file so that the configuration of the tool can be set and updated remotely. The tool uses a
flag file on the FTP site (based on device serial number) to ensure the file is only pulled once. By removing the flag
file for a particular device you can force it to download the file again.
• Hostname - Specifies the ftp server to connect to.
• Username - Specifies the username to use to log onto the FTP server.
• Password - Specifies the password to use to log onto the FTP server.
• Enable push - Enables pushing of file to the specified FTP server.
• Push interval - Specifies the amount of time, in milliseconds, in between pushes to the FTP server.
• Local push directory - Specifies the local directory to push files from.
• Remote push directory - Specifies the remote directory to push files to. A separate folder will be created for each
device using the device serial number.
• Wakeup for push time - If the pull interval is set to 0, this will specify a specific time to initiate an FTP push.
• Do push on start - Enable an FTP push upon startup of the plug-in.
• Enable pull - Enable FTP pull functionality.
• Pull interval - Specifies the amount of time, in milliseconds, in between pulls from the FTP server.
• Remote pull directory - Specifies the directory on the FTP server where the filed to be pulled will be located.
• Remote pull filename - Specifies the file to be pulled from the FTP server.
• Local pull directory - Specifies the local directory to store the file pulled from the FTP server.
TCPDump Plug-in
The TCPDump plug-in facilitates the capturing of network traces to be viewed in Wireshark or a similar tool that can
decode .cap files.
• Log path - Specifies the location to store the TCPDump output log files.
• Base filename - Specifies the base filename to use when storing the TCPDump files. The index number of the
current log file will be appended to this filename.
• Log file count - Specifies the number of log files to cycle through when storing the network traces.
• Max file size - Specifies the maximum file size, in megabytes, for each log file created.
• Output - The TCPDump plug-in outputs a set of .cap files according to the configurable options. These are binary
files and can be opened with Wireshark tool.
ANR Plugin
Application Not Responsive (ANR) indicates that a running application's UI thread is not responding for a specified
time period. RxLogger is able to detect this condition and trigger a copy of the call stack trace of the unresponsive
application into the log directory. The event will also be indicated in the high level CSV log.
• Log path - Specifies the default log path to store the ANR log files.
• Max file size - Specifies the maximum file size, in killobytes, of the ANR trace to be copied. If the file is too
large, the copy will be skipped. On older devices that append each ANR event to the same trace file the size can
get very large. In this case we will avoid expending resources to copy the large file every time.
• Output - The ANR plug-in creates text files in the specified log directory that contain the call stacks of
application's that have been shut down by the system due to an ANR event.
May 2015 | MN000116A02-A