Mounting A Four Slot Cradle - Motorola MC67 Integrator Manual

Figure 22: Wall Mount Bracket
Mounting Slot

Mounting a Four Slot Cradle

To mount a four slot cradle:
Procedure:
1 Screw the supplied screws into the bottom of the four slot cradle. The screw heads should protrude about a quarter
of an inch from the cradle.
Figure 23: Cradle Mounting Screws
Four Slot
Cradle Bottom
2 Align the Wall Mount Bracket mounting tabs with the mounting slots in the back of the four slot cradle. Slip the
two mounting tabs into mounting slots.
3 Swing the four slot cradle down onto the mounting bracket and align the mounting screws so that they fit into the
screw slots.
Mounting Tab (2)
Mounting Screw (4)
Mounting Screw (2)
MN000116A02-A | May 2015
Accessories | 37