Scanner Selection - Motorola MC67 Integrator Manual

Enabled
Enables or disables this plug-in. A check in the checkbox indicates that the plug-in is enabled.

Scanner Selection

Configures which scanning device to use for bar code data capture when the profile is active.
• Auto - The software automatically selects the 2D Imager.
• 2D Imager - Scanning is performed using the 2D Imager.
Decoders
Configures which bar code decoders are enabled or disabled. For best performance disable all unnecessary decoders.
Touch Decoders. The Barcode input screen appears. A check in the checkbox indicates that the decoder is enabled.
By default the most commonly used decoders are enabled (shown below with an asterisk). The supported decoders
are:
UPC-A*
EAN-8*
Interleaved 2 of 5
GS1 DataBar Expanded
PDF417*
MicroQR
MicroPDF
UK Postal
Canadian Postal
Codabar*
Trioptic 39
Korean 3 of 5
Matrix 2 of 5
to return to the previous screen.
Decoder Params
Use Decode Params to configure individual decoder parameters.
• UPCA
- Report Check Digit - The check digit is the last character of the symbol used to verify the integrity of the
data. Enables or disables this option. A check in the checkbox indicates that the option is enabled (default -
enabled).
- Preamble - Preamble characters are part of the UPC symbol consisting of Country Code and System
Character. Select the appropriate option to match the host system.
There are three options for transmitting a UPCA preamble:
+ Preamble None - Transmit no preamble.
+ Preamble Sys Char - Transmit System Character only (default).
+ Preamble Country and Sys Char - Transmit System Character and Country Code ("0" for USA). Select
the appropriate option to match the host system.
UPC-E0*
Code 128*
GS1 DataBar*
Datamatrix*
Composite AB
Aztec*
USPostnet
Japanese Postal
Dutch Postal
MSI
Discrete 2 of 5
Code 11
UPC-E1
DataWedge Configuration | 63
EAN-13*
Code 39*
GS1 DataBar Limited
QR Code*
Composite C
Maxicode*
USPlanet
Australian Postal
US4state FICS
Code 93
Chinese 2 of 5
TLC 39
MN000116A02-A | May 2015