Motorola MC70 User Manual
  1. Manuals
  2. Brands
  3. Motorola Manuals
  4. PDA
  5. MC70 - Enterprise Digital Assistant
  6. User manual

Motorola MC70 User Manual

Enterprise digital assistant
Hide thumbs Also See for MC70:
Table of Contents

Advertisement

Quick Links

MC70 Enterprise Digital Assistant
User Guide

Advertisement

Table of Contents
loading

Related Manuals for Motorola MC70

Summary of Contents for Motorola MC70

  • Page 1 MC70 Enterprise Digital Assistant User Guide...
  • Page 3 MC70 User Guide 72E-71769-02 Revision A February 2007...

  • Page 4: Patents

    Motorola. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Motorola.

  • Page 5: Revision History

    Revision History Changes to the original manual are listed below: Change Date Description 1/2006 Initial release. 8/2006 Add Revision History page. Chapter 2: Add vibrator feature information. Remove Green and Red Phone button remapping information. Not supported. Update cold boot procedure to remove step to calibrate screen after cold boot. -02 Rev A 02/01/07 Add MC7095 information and AKU 3.2 features.
  • Page 6 MC70 User Guide...

  • Page 7: Table Of Contents

    Table of Contents Patents........................... ii Revision History ......................iii About This Guide Introduction ........................xi Documentation Set ....................xi Configurations........................ xii Software Versions....................xii Chapter Descriptions ..................... xv Notational Conventions....................xv Related Documents ....................... xvi Service Information ......................xvi Chapter 1: Getting Started Introduction ........................
  • Page 8 MC70 User Guide On Devices with AKU 1.0 .................. 1-12 On Devices with AKU 2.2 or higher ..............1-13 Chapter 2: Using the MC70 Introduction ........................2-1 Status Icons ........................2-1 Speaker Icon ......................2-3 Battery Icon ......................2-4 Connectivity Icon ..................... 2-4 WWAN Icon ......................
  • Page 9 Table of Contents - vii Discovering Bluetooth Device(s) ................... 3-7 Bonding with Discovered Device(s) ..............3-9 Renaming a Bonded Device ................3-10 Deleting a Bonded Device ................. 3-11 Accepting a Bond ....................3-11 Discovering Services ....................3-12 File Transfer Services ..................... 3-13 Creating a New File or Folder ................
  • Page 10 Charging the Spare Battery ..................5-9 Battery Charging Indicators ..................5-9 Charging Temperature ..................5-10 Four Slot Spare Battery Charger .................. 5-11 MC70 Battery Shim Installation ................5-11 Spare Battery Charging ..................5-11 Battery Charging Indicators ..................5-12 Charging Temperature ..................5-12 Magnetic Stripe Reader (MSR) ..................
  • Page 11 Four Slot Ethernet Cradle ..................6-8 Vehicle Cradle ......................6-9 Four Slot Spare Battery Charge ................6-10 Cables ........................6-11 Magnetic Stripe Reader ..................6-11 Trigger Handle ......................6-12 Appendix A: Technical Specifications MC70 Technical Specifications ..................A-1 MC70 Accessory Specifications ..................A-5...
  • Page 12 MC70 User Guide...

  • Page 13: About This Guide

    Chapter 3 About This Guide Introduction This guide provides information about using the MC70 Enterprise Digital Assistant (EDA) and accessories. NOTE Screens and windows pictured in this guide are samples and can differ from actual screens. Documentation Set The documentation set for the MC70 provides information for specific user needs, and includes: ®...

  • Page 14: Configurations

    MC70 User Guide Configurations This guide covers the following configurations: Data Operating Configuration Radios Display Memory Keypads Capture System MC7004 WLAN: 802.11b/g 3.5” QVGA 64 MB RAM/ 1D laser Windows Numeric or WPAN: Bluetooth Color 128 MB Flash scanner or Mobile 5.0...
  • Page 15 About This Guide xiii The second line lists the operating system version and the build number. The last part of the build number represents the AKU number. For example, Build 14929.2.2.1 indicates that the device is running AKU version 2.2.1. OEM Version To determine the OEM software version: >...
  • Page 16 MC70 User Guide Fusion Software To determine the Fusion software version: icon > > Wireless Strength Wireless Status Versions Phone Software To determine the Phone software version: > > > > tab. Start Phone Menu Options Version Information MC7094 MC7095...

  • Page 17: Chapter Descriptions

    EDA. Notational Conventions The following conventions are used in this document: • “EDA” refers to the Symbol MC70 series of hand-held EDAs. • Italics are used to highlight the following: • Chapters and sections in this and related documents •...

  • Page 18: Related Documents

    Symbol Global Interactive Center, you may need to return your equipment for servicing and you will be given specific directions. Motorola is not responsible for any damages incurred during shipment if the approved shipping container is not used. Shipping the units improperly can possibly void the warranty.

  • Page 19: Chapter 1 Getting Started

    EDA for the first time. Radio Power Charge Scan/Decode Status LED Status LED Receiver Power Button Scan/Action Button Up/Down Button Touch Screen with Keypad Protective Overlay (Numeric Keypad Pictured) I/O Connector Microphone Handstrap Attachment MC70 Front View Figure 1-1...

  • Page 20: Unpacking

    1 - 2 MC70 User Guide Handstrap Battery Cover Handstrap Slot Battery Cover Latch Headset Jack Memory Card Slot Speaker Scan Window Action Button (Imager Model Shown) Scan/Action Button Tether Point Stylus MC70 Rear View Figure 1-2 Unpacking Carefully remove all protective material from the EDA and save the shipping container for later storage and shipping.

  • Page 21: Accessories

    VCD7000 Vehicle Cradle Installs in a vehicle and charges the EDA main battery and a spare battery. Provides serial data communication between an MC70 and an external device. Four Slot Spare Battery Charges up to four EDA spare batteries. Includes an adapter.

  • Page 22: Getting Started

    1 - 4 MC70 User Guide Getting Started To start using the EDA for the first time: • Install the main battery and cover assembly. • Charge the EDA. • Power on the EDA. • Configure the EDA. Installing and Removing the Main Battery Installing the Main Battery Before using the EDA, install a lithium-ion battery.

  • Page 23: Removing The Main Battery

    Getting Started 1 - 5 With the battery cover latches open, insert the cover, bottom first, then press down on the top of the cover. Battery Cover Latch Battery Cover Inserting the Battery Cover Figure 1-4 Close the battery cover latches on either side of the battery cover. Insert the handstrap through the handstrap slot, then tighten and press down to secure.

  • Page 24: Charging The Battery

    40 hours. To charge batteries, use either a cable or one of the following cradles. For cradle setup and charging procedures refer to the MC70 Integrator Guide. •...

  • Page 25: Charging Spare Batteries

    Getting Started 1 - 7 The standard capacity battery (1900 mAh) fully charges in less than four hours. The extended capacity battery (3800 mAh) fully charges in less than eight hours. LED Charge Indicators Table 1-2 Charge Status LED Indication EDA is not charging;...

  • Page 26: Charging Temperature

    1 - 8 MC70 User Guide Charging Temperature Charge batteries in temperatures from 0 C to 40 C (32°F to 104°F). Note that at temperatures above 35 charging is intelligently controlled by the EDA and the charging accessory in order to ensure safe operation and optimize long-term battery life.

  • Page 27: Sim Card

    Getting Started 1 - 9 SIM Card NOTE MC7004 and MC7094 only. GPRS phone service requires a Subscriber Identification Module (SIM) card, or smart card. Obtain this card from the phone service provider. The card fits into the EDA and can contain the following information: •...

  • Page 28: Adjusting The Handstrap

    Current network: Make a call to verify connection. NOTE For detailed information about WWAN activation and settings, refer to the MC70 Integrator Guide. Adjusting the Handstrap The EDA handstrap is attached to the bottom of the battery cover. Adjust the handstrap to increase comfort when holding the EDA for extended periods of time.

  • Page 29: Removing The Screen Protector

    Getting Started 1 - 11 Removing the Screen Protector A screen protector is applied to the MC70. Symbol recommends using this to minimize wear and tear. Screen protectors enhance the usability and durability of touch screen displays. To remove the screen protector, lift the corner using a thin plastic card, such as a credit card, then carefully lift it off the display.

  • Page 30: Changing The Power Settings

    1 - 12 MC70 User Guide Changing the Power Settings To set the EDA to turn off after a short period of non-use: > > > tab > icon > tab. Start Settings System Power Advanced Select the On battery power: Turn off device if not used for check box and select a value from the drop-down list.

  • Page 31: On Devices With Aku 2.2 Or Higher

    Getting Started 1 - 13 Turning Off the Bluetooth and WAN Radios NOTE The Flight Mode feature only turns off the WAN and Bluetooth radios. You must turn off the WLAN radio separately. To turn off the Bluetooth and WAN radios: •...
  • Page 32 1 - 14 MC70 User Guide Wireless Manager Window Figure 1-13 To enable or disable a wireless connection, tap its blue bar. To enable or disable all wireless connections, tap and hold the bar. To configure settings for a connection, tap...

  • Page 33: Chapter 2: Using The Mc70

    Using the MC70 Chapter 2 Chapter 2 Chapter 2 Using the MC70 Introduction This chapter explains the buttons, status icons, and controls on the EDA, and provides basic instructions for using the EDA, including powering on and resetting the EDA, and entering and capturing data.
  • Page 34 2 - 2 MC70 User Guide Status Icons (Continued) Table 2-1 Icon Function Description Connectivity Connection is active. Wi-Fi on. GPRS available. (MC7004 and MC7094) GPRS in use. (MC7004 and MC7094) EGPRS available. (MC7004 and MC7094) EGPRS in use. (MC7004 and MC7094) 1xRTT available.

  • Page 35: Speaker Icon

    Using the MC70 2 - 3 The command bar at the bottom of the screen can contain the task tray icons listed in Table 2-2. Task Tray Icons Table 2-2 Icon Description Wireless connection Indicates WLAN signal strength. status Bluetooth Enabled Bluetooth radio is on.

  • Page 36: Battery Icon

    2 - 4 MC70 User Guide Battery Icon NOTE On devices with AKU 1.0, the Battery icon displays on the navigation bar only when the battery power falls below a predetermined level. On devices with AKU 3.2 and higher, the Battery icon always appears on the navigation bar when the Today screen is visible.

  • Page 37: Wwan Icon

    Using the MC70 2 - 5 Connectivity Dialog Box Figure 2-4 WWAN Icon icons indicate the status of the phone and antenna/signal. WWAN Call in Progress WWAN Connectivity Icon Figure 2-5 Time Icon NOTE On devices with AKU 1.0, the Time icon displays on the navigation bar by default.

  • Page 38: Instant Message Icon

    2 - 6 MC70 User Guide Digital Clock Analog Clock Time Icon Format Menu Figure 2-6 To display current date, time, and appointments, tap the icon to display the Time Time and Next Appointment dialog box. Current Date and Time...

  • Page 39: E-Mail Icon

    Using the MC70 2 - 7 MSN Messenger Dialog Box Figure 2-8 E-Mail Icon icon notifies you when you receive incoming e-mails. E-Mail New E-mail Messages Dialog Box Figure 2-9 Multiple Notifications Icon icon appears when two or more message notifications occur. Tap the icon to display Multiple Notifications the multiple notification icons.

  • Page 40: Led Indicators

    2 - 8 MC70 User Guide LED Indicators The MC70 has three LED indicators. The Scan/Decode LED indicates status for scanning. The Charge Status LED indicates status for main battery charging. The Radio Power Status LED indicates radio status. Table 2-3 describes the LED indications.

  • Page 41: Numeric Keypad Configuration

    Table 2-5 on page 2-11 for the keypad’s special functions. MC70 Numeric Keypad Figure 2-12 MC70 Numeric Keypad Descriptions Table 2-4 Description Blue Key (left) Use this key to launch applications or access items (shown on the keypad in blue).
  • Page 42 2 - 10 MC70 User Guide MC70 Numeric Keypad Descriptions (Continued) Table 2-4 Description Green/Red Phone MC7004, MC7094 and MC7095: Green Phone: press to display the phone keypad window or to dial a phone number (from the phone keypad window).
  • Page 43 Using the MC70 2 - 11 MC70 Numeric Keypad Descriptions (Continued) Table 2-4 Description SHIFT Press and release the SHIFT key to activate the keypad alternate SHIFT functions. A single press displays the following icon at the bottom of the screen, until a second...

  • Page 44: Qwerty Keypad Configuration

    2 - 12 MC70 User Guide Numeric Keypad Input Modes (Continued) Table 2-5 Orange Key Orange + Shift Keys Numeric Mode (Alpha Lowercase Mode) (Alpha Uppercase Mode) Blue+ SHIFT 1st Press 1st Press + Key Press Press Press Press Press...
  • Page 45 Using the MC70 2 - 13 QWERTY Keypad Descriptions Table 2-6 Action Blue Key (left) Launches applications (shown on the keypad in blue). • Press the Blue key once to activate this mode temporarily, followed by another key. This displays the following icon at the bottom of the screen, until a second key is pressed: •...
  • Page 46 2 - 14 MC70 User Guide QWERTY Keypad Descriptions (Continued) Table 2-6 Action Menu Accesses the command or menu above it on the screen. Shift Changes the state of the alpha characters from lowercase to uppercase. • Press the Shift key once to activate this mode temporarily, followed by another key.
  • Page 47 Using the MC70 2 - 15 QWERTY Keypad Input Modes Table 2-7 Normal Shift + Key Orange + Key Blue + Key Start Menu Menu Phone “ áü ‘ BACKSPACE Backspace Shift Shift & Note: An application can change the key functions. The keypad may not function exactly as described.

  • Page 48: Special Character Key

    Note: An application can change the key functions. The keypad may not function exactly as described. Special Character Key NOTE Special characters are only available on the QWERTY keypad configurations. To add special characters using the MC70 key, type the related character first, then press the Orange + áü...
  • Page 49 Using the MC70 2 - 17 Special Characters (Continued) Table 2-8 Special Characters “ &...

  • Page 50: Function Buttons

    2 - 18 MC70 User Guide Special Characters (Continued) Table 2-8 Special Characters ‘ Function Buttons The EDA’s buttons perform certain functions. Power Button Scan/Action Button Up/Down Button Action Button Scan/Action Button Function Buttons Figure 2-14 • Power: Press the red button to turn the EDA screen on and off.

  • Page 51: Using A Headset

    Using the MC70 2 - 19 • Tap and Hold: Tap and hold the stylus on an item to see a list of actions available for that item. On the pop-up menu that appears, tap the action to perform. •...

  • Page 52: Linear Scanning

    2 - 20 MC70 User Guide Data Capture The MC70 offers two types of data capture options: • Linear scanning • Imaging. Imager Linear Scanner Data Capture Configurations Figure 2-16 NOTE To perform data capture a scanning enabled application must be installed on the EDA. A sample scanning application can be downloaded from the Symbol Support site at http://support.symbol.com.

  • Page 53: Scanning Considerations

    Using the MC70 2 - 21 NOTE To enable Pick List Mode, download the Control Panel applet from the Symbol Support site at http://support.symbol.com. Pick List can also be set in an application using a API command. • Pick List Mode: This mode allows you to selectively decode a bar code when more than one bar code is in the EDA’s field of view.

  • Page 54: Imager Scanning

    2 - 22 MC70 User Guide Linear Scanning Figure 2-17 Press the scan button. Ensure the red scan beam covers the entire bar code. The Scan/Decode LED lights red to indicate that scanning is in process, then lights green and a beep sounds, by default, to indicate the bar code was decoded successfully.

  • Page 55: Resetting The Eda

    Using the MC70 2 - 23 Linear bar code PDF417 symbol Symbol View Finder (Aiming Pattern) Correct Imager Aiming Pattern: Bar Code Centered Figure 2-20 Incorrect Correct Imager Aiming Pattern: Bar Code Not Centered Figure 2-21 Pick List Mode with Multiple Bar Codes in Aiming Pattern Figure 2-22 Release the scan button.

  • Page 56: Performing A Cold Boot

    2 - 24 MC70 User Guide Performing a Cold Boot To perform a cold boot simultaneously press the button and the keys. Power Waking the EDA The wakeup conditions define what actions wake up the EDA. These settings are configurable and the factory...
  • Page 57 Using the MC70 2 - 25 Unlock Device Window Figure 2-24 on the window. Unlock Unlock Device...
  • Page 58 2 - 26 MC70 User Guide...

  • Page 59: Chapter 3 Using Bluetooth

    Using Bluetooth Chapter 3 Chapter 3 Using Bluetooth Introduction Bluetooth-equipped devices can communicate without wires, using frequency-hopping spread spectrum (FHSS) radio frequency (RF) to transmit and receive data in the 2.4 GHz Industry Scientific and Medical (ISM) band (802.15.1). Bluetooth wireless technology is specifically designed for short-range (30 feet/10 meters) communication and low power consumption.

  • Page 60: Security

    3 - 2 MC70 User Guide Security The current Bluetooth specification defines security at the link level. Application-level security is not specified. This allows application developers to define security mechanisms tailored to their specific need. Link-level security occurs between devices, not users, while application-level security can be implemented on a per-user basis.

  • Page 61: Enabling Bluetooth

    Using Bluetooth 3 - 3 Disable Bluetooth Figure 3-1 Enabling Bluetooth To enable Bluetooth, tap icon > . The icon changes to indicate that Bluetooth Enable Bluetooth Bluetooth Bluetooth is enabled. Enable Bluetooth Figure 3-2 Bluetooth Power States Cold Boot Performing a cold boot on the EDA turns off Bluetooth after initialization (which takes a few moments).

  • Page 62: Suspend

    3 - 4 MC70 User Guide Suspend Suspending the EDA turns off Bluetooth. NOTE Suspending the EDA powers off the Bluetooth radio and drops the piconet (Bluetooth connection). When the EDA resumes, it take approximately 10 seconds for the Bluetooth radio driver to re-initialize the radio.

  • Page 63: Wizard Mode

    Using Bluetooth 3 - 5 Wizard Mode Wizard Mode provides a simple process for discovering and connecting to Bluetooth devices. NOTE Switching between Wizard Mode and Explorer Mode closes all active connections. The following steps provide an example for using the Wizard to connect to remote devices. Tap the icon and select .
  • Page 64 3 - 6 MC70 User Guide Select Remote Device Window Figure 3-5 Select a device from the list and then tap . The window appears. Next Connection Favorite Options Connection Favorite Options Window Figure 3-6 Select the check box to save this service in the view.

  • Page 65: Explorer Mode

    Using Bluetooth 3 - 7 to connect to the service. Connect Explorer Mode window is easy to navigate and provides greater control to users familiar with Bluetooth. Explorer Mode The menu bar provides quick access to the options and tools used to connect to devices. To access Explorer Mode, tap >...
  • Page 66 3 - 8 MC70 User Guide BTExplorer Window Figure 3-9 Tap and hold and select from the pop-up menu. The EDA searches for Remote Devices Discover Devices Bluetooth devices in the area. Discover Devices Figure 3-10 The discovered devices display in the folder.

  • Page 67: Bonding With Discovered Device(S)

    Using Bluetooth 3 - 9 Bonding with Discovered Device(s) A bond is a relationship created between the EDA and another Bluetooth device in order to exchange information in a secure manner. Creating a bond involves entering the same PIN on the two devices. After creating a bond and turning on the Bluetooth radios, the devices recognize the bond and can exchange information without re-entering a PIN.

  • Page 68: Renaming A Bonded Device

    3 - 10 MC70 User Guide Bonded (Paired) Discovered Device Figure 3-14 Renaming a Bonded Device To rename a bonded device: Launch BTExplorer Tap and hold the device to rename. Rename Device Selection Dialog Box Figure 3-15 Select in the pop-up menu. The window appears.

  • Page 69: Deleting A Bonded Device

    Using Bluetooth 3 - 11 Change Device Name Window Figure 3-16 Enter a new name for the bonded device in the text box. Tap Deleting a Bonded Device To delete a device no longer needed: Launch BTExplorer Tap and hold the device to delete and select in the pop-up menu.

  • Page 70: Discovering Services

    3 - 12 MC70 User Guide PIN Code Request Window Figure 3-18 In the text box, enter the same PIN entered on the device requesting the bond. The PIN must be PIN Code: between 1 and 16 characters. In the text box, edit the name of the device requesting the bond, if desired.

  • Page 71: File Transfer Services

    Using Bluetooth 3 - 13 List of Discovered Services Figure 3-20 Some examples of available services are: • File Transfer Services • Dial-Up Networking Services • OBEX Object Push Services • Headset or Hands-Free Services • Serial Port Services. See the following sections for information on these services. File Transfer Services To transfer files between the EDA and another Bluetooth enabled device: Ensure the EDA is discoverable and connectable.

  • Page 72: Creating A New File Or Folder

    3 - 14 MC70 User Guide Remote Device Folders Figure 3-21 Tap and hold on the file. A pop-up menu appears. Select the action to perform: • - create a new file or folder on the remote device • - delete the selected file on the remote device.

  • Page 73: Copying A File

    Using Bluetooth 3 - 15 Copying a File To copy a file to a remote device: Tap and hold on the file and select . The window appears. Send Local File Navigate to the directory to save the file and select a file. .
  • Page 74 3 - 16 MC70 User Guide Before setting up dial-up networking, obtain dial-up information and other necessary settings for the office network or ISP. To create a new Bluetooth connection: Ensure the EDA is discoverable and connectable. See Bluetooth Settings on page 3-24.

  • Page 75: Adding A Dial-Up Entry

    Using Bluetooth 3 - 17 In the text box, enter the user name for this connection. User name: In the text box, enter the password for this connection. Password: In the text box, enter the domain for this connection, if required. Domain: .

  • Page 76: Object Exchange Push Services

    3 - 18 MC70 User Guide Add Dial-Up Entry Figure 3-26 window appears. Add Phone Book Entry Add Phone Book Entry Window Figure 3-27 In the text box, enter a name for this connection. Name for the connection: In the text box, enter the country code for the country that you are calling.

  • Page 77: Sending A Contact

    Using Bluetooth 3 - 19 Select the folder. Trusted Devices Tap the remote device folder. Tap and hold on and select . The window appears. OBEX Object Push Connect OBEX Object Push In the drop-down list, select one of the following options: Action Send Contact Information Swap Contact...

  • Page 78: Sending A Picture

    3 - 20 MC70 User Guide Select Contact Entry Window Figure 3-29 Select a contact to send to the other device. to send the contact to the other device and display a confirmation dialog box on the other device to accept the contact.

  • Page 79: Headset Services

    Using Bluetooth 3 - 21 In the drop-down list, select Action: Send A Picture . The window appears. Send Local Picture Send Local Picture Window Figure 3-31 Navigate to the picture to send to the other device. Open to send the picture to the other device and display a confirmation dialog box on the other device to accept the picture.

  • Page 80: Serial Port Services

    3 - 22 MC70 User Guide Serial Port Services Use the wireless Bluetooth serial port connection as you would a physical serial cable connection. Configure the application that will use the connection to the correct serial port. To establish a serial port connection: Ensure the EDA is discoverable and connectable.

  • Page 81: Personal Area Network Services

    Using Bluetooth 3 - 23 Select the folder. Trusted Devices Tap the remote device folder. Tap and hold and select in the pop-up menu. ActiveSync Connect Connect to ActiveSync Service Figure 3-33 window appears In the drop-down list select a COM port. Remote Service Connection Local COM Port Remote Service Connection Window...

  • Page 82: Bluetooth Settings

    3 - 24 MC70 User Guide Bluetooth Settings Use the window to configure the operation of the application. Tap > BTExplorer Settings BTExplorer Tools . The window appears. Settings BTExplorer Settings Device Info Tab Use the tab to configure the EDA’s Bluetooth connection modes.

  • Page 83: Dial-Up Networking Service

    Using Bluetooth 3 - 25 To add a service: . The window displays. Add Local Service Add Local Service Window Figure 3-37 In the list, select a service to add. . The window displays for the selected service. Edit Local Service Select the appropriate information and then tap .

  • Page 84: File Transfer Service

    3 - 26 MC70 User Guide File Transfer Service File transfer allows other Bluetooth devices to browse files. File Transfer Information Window Figure 3-39 Service Name Displays the name of the service. Service Security Select the type of security from the drop-down list. Options are...

  • Page 85: Headset Service

    Using Bluetooth 3 - 27 Headset Service Headset Service allows connection to headset devices. Headset Service Window Figure 3-41 Service Name Lists the name of the audio service. OBEX Object Push Service OBEX Object Push allows other Bluetooth devices to push contacts, business cards, pictures, appointments, and tasks to the EDA.

  • Page 86: Personal Area Networking Service

    3 - 28 MC70 User Guide Personal Area Networking Service Personal Area Networking hosts a Personal Area Network which allows communication with other Bluetooth devices. Personal Area Networking Window Figure 3-43 Service Name Displays the name of the service. Service Security Select the type of security from the drop-down list.

  • Page 87: Security Tab

    Using Bluetooth 3 - 29 Service Name Displays the name of the service. Service Security Select the type of security from the drop-down list. Options are None , or Authenticate Authenticate/Encrypt Local COM Port Select the COM port. Local Baud Rate Select the communication baud rate.

  • Page 88: Virtual Com Port Tab

    3 - 30 MC70 User Guide BTExplorer Settings - Discovery Tab Figure 3-46 Inquiry Length Sets the amount of time the EDA takes to discover Bluetooth devices in the area. Name Discovery Mode Select either Automatic Manual Discovered Devices Deletes all discovered devices and link keys.

  • Page 89: Miscellaneous Tab

    Using Bluetooth 3 - 31 Miscellaneous Tab BTExplorer Settings - Miscellaneous Tab Figure 3-48 Highlight Connections Select the connection type to highlight when connected. In the Wizard Mode, the only options are Favorites or None. In the Explorer Mode the options are , or None Tree View Only...
  • Page 90 3 - 32 MC70 User Guide...

  • Page 91: Chapter 4: Using The Mc7004/94/95 Phone

    MC7094) or Evolution Data-Optimized (EvDO) (MC7095) using Cellular Line, or using the modem specified by the mobile operator. For more information, or to customize the EDA phone by changing phone settings, see the MC70 Integrator Guide. Accessing the Phone Keypad Access the keypad regardless of the program in use.

  • Page 92: Making A Call Using The Keypad

    4 - 2 MC70 User Guide To receive calls when the EDA is suspended, leave the phone radio turned on and ensure the EDA is set to wake with any key. Making a Call Using the Keypad Dial phone calls from the phone keypad using speed dial or from call history. The most direct method is using the phone keypad.

  • Page 93: With Aku 2.2 Or Higher

    Using the MC7004/94/95 Phone 4 - 3 Signal Icon Turning Flight Mode On and Off Figure 4-2 With AKU 2.2 or Higher To determine the operating system AKU version, see Configurations on page xii. NOTE Windows Mobile 5.0 devices with AKU 2.2 or higher include , which provides a simple method Wireless Manager of enabling and disabling the phone.
  • Page 94 4 - 4 MC70 User Guide Wireless Manager Figure 4-4 To toggle on or off the phone, tap blue Phone bar. To configure settings for a connection, tap > Menu Phone Settings NOTE To receive calls when your device is turned off, leave the phone turned on.

  • Page 95: Audio Modes

    Using the MC7004/94/95 Phone 4 - 5 Answering a Call A dialog box appears on the EDA when it receives an incoming call. If the phone is set to ring, a ring tone sounds. Answer or ignore the incoming call. To answer an incoming call tap Answer on the >...

  • Page 96: Incoming Call Features

    4 - 6 MC70 User Guide Incoming Call Features • If you receive a call while in a call, tap to place the call in call waiting. Wait • You can use other programs on the EDA during a call. To switch back to Phone, tap or tap >...

  • Page 97: Taking Notes

    Using the MC7004/94/95 Phone 4 - 7 Taking Notes To create a note during a call, tap on the display, then enter the note. For more information about creating Note notes see the Windows On-Device Help. To access a note created during a call: >...

  • Page 98: Using Speed Dial

    4 - 8 MC70 User Guide Using Speed Dial Create speed dial numbers to dial frequently called numbers with a single tap. Before creating a speed dial entry, ensure the phone number exists in Contacts. Adding a Speed Dial Entry To add a speed dial entry from the phone keypad: Ensure the contact and phone number are in the Contacts list.
  • Page 99 Using the MC7004/94/95 Phone 4 - 9 Speed Dial Contact List Figure 4-12 to exit the Speed Dial Contact List To add a speed dial entry from the window: Contacts > Start Contacts Contacts Figure 4-13 Tap and hold the contact name.

  • Page 100: Editing A Speed Dial Entry

    4 - 10 MC70 User Guide Contacts Menu Figure 4-14 Add to Speed Dial Speed Dial Contact Location Figure 4-15 Tap the up/down arrows to select an available location to assign as the new speed dial entry. The first speed dial location is reserved for voice mail.

  • Page 101: Deleting A Speed Dial Entry

    Using the MC7004/94/95 Phone 4 - 11 Speed Dial Contact List Figure 4-16 Tap and hold the contact name. Speed Dial Delete Menu Figure 4-17 Edit... Change the name, phone number, or location information. NOTE Editing names and phone numbers in Speed Dial does not alter contact information in Contacts (Start > Contacts).

  • Page 102: Making A Speed Dial Call

    4 - 12 MC70 User Guide Speed Dial Delete Menu Figure 4-18 Delete to confirm permanently deleting the speed dial entry. NOTE Deleting names and phone numbers in Speed Dial does not delete the contact information in Contacts (Start > Contacts).

  • Page 103: Using Call History

    Using the MC7004/94/95 Phone 4 - 13 Using Call History Use Call History to call someone who was recently called, or recently called in. Call History provides the time and duration of all incoming, outgoing, and missed calls. It also provides a summary of total calls and easy access to notes taken during a call.

  • Page 104: Resetting The Recent Calls Counter

    4 - 14 MC70 User Guide Call History - All Calls/Show Menu Figure 4-21 Select a view type from the menu to display only missed calls, outgoing calls, incoming calls, or calls listed alphabetically by caller name. Tap ok to exit the window.

  • Page 105: Deleting Call History Items By Call Date

    Using the MC7004/94/95 Phone 4 - 15 Call History - Call Timers Figure 4-23 . (The counter cannot be reset.) Reset All Calls: Tap ok to exit the window. Call Timers Deleting Call History Items by Call Date > or press the green phone key on the EDA’s keypad to display the Phone keypad. Start Phone From the Phone keypad, tap...

  • Page 106: Viewing Call Status

    4 - 16 MC70 User Guide Call History - Tools Menu Figure 4-25 Select Delete all calls. Call History - Delete All Dialog Figure 4-26 to exit the window. Call History Viewing Call Status > or press the green phone key on the EDA’s keypad to display the Phone keypad.

  • Page 107: Using The Call History Menu

    Using the MC7004/94/95 Phone 4 - 17 NOTE When more than one call is on the phone line, only the duration of the first call is recorded. to exit. Using the Call History Menu Use the Call History menu to dial voice mail, access the Activation Wizard, save to contacts, view a note, delete a listing, send an SMS, and make a call.

  • Page 108: Swapping Calls

    4 - 18 MC70 User Guide Contacts Menu Figure 4-29 Call Work NOTE To make a call from an open contact, tap the number to call. See On-Device Help for more information about Contacts. Swapping Calls To move between two or more phone calls: >...

  • Page 109: Conference Calling

    Using the MC7004/94/95 Phone 4 - 19 Call Conferencing - Conferencing Figure 4-31 to move from one call to the other. Swap or press the red phone key on the EDA keypad to end each call. Conference Calling To create a conference phone session with two or more people and the initiator: >...

  • Page 110: Text Messaging

    4 - 20 MC70 User Guide Creating a Conference Call Figure 4-33 or press the red phone key on the EDA keypad to end the conference call. NOTE To speak privately with one party during a conference call, tap Menu > Private. To include all parties again, tap Menu >...
  • Page 111 Using the MC7004/94/95 Phone 4 - 21 Tools Menu Figure 4-34 On the window, enter your message. Text Messages Address Area Message Area Send Button Text Messages Window Figure 4-35 to send the message. Send...
  • Page 112 4 - 22 MC70 User Guide...

  • Page 113: Chapter 5: Accessories

    Accessories Chapter 5 Chapter 5 Accessories Introduction MC70 accessories, listed below, provide a variety of product support capabilities. Cables Snap one of the following cables on to the EDA to connect an external device. • USB Client charge cable •...

  • Page 114: Headset

    5-2). Refer to the documentation provided with the card for more information, and follow the manufacturer’s recommendations for use. The slot also accepts SDIO cards. NOTE SD cards are interoperable with MMC cards; both can be used in MC70 EDAs. CAUTION Follow proper ESD precautions to avoid damaging the MMC/SD.

  • Page 115: Sd/Sdio Setup

    Accessories 5 - 3 Card Cover Removal Figure 5-2 Insert the card with the card contacts facing down and the cut corner on the right, until you feel a click. Replace the housing cover and secure with the screws. To remove an MMC/SD card: Power off the EDA.

  • Page 116: Single Slot Usb/Serial Cradle

    • Provides 5.4 VDC power for operating the EDA. • Synchronizes information between the EDA and a host computer. Refer to the MC70 Integrator Guide for information on setting up a partnership between the EDA and a host computer. •...

  • Page 117: Charging The Spare Battery

    Accessories 5 - 5 Charge Status LED EDA Battery Charging Figure 5-4 Charging the Spare Battery Spare Battery Spare Battery Charging LED Spare Battery Charging Figure 5-5 Battery Charging Indicators The Single Slot USB/Serial Cradle charges the EDA’s main battery and a spare battery simultaneously. The EDA’s charge LED indicates the status of the battery charging in the EDA.

  • Page 118: Charging Temperature

    Charging error. Four Slot Ethernet Cradle This section describes how to set up and use a Four Slot Ethernet cradle with the EDA. For cradle communication setup procedures refer to the MC70 Integrator Guide. The Four Slot Ethernet cradle: •...

  • Page 119: Battery Charging Indicators

    1-7. VCD7000 Vehicle Cradle This section describes how to use a VCD7000 vehicle cradle with the EDA. For cradle installation and communication setup procedures refer to the MC70 Integrator Guide. Once installed in a vehicle, the cradle: • holds the EDA securely in place •...

  • Page 120: Charging The Eda Battery

    5 - 8 MC70 User Guide • provides a serial port for data communication between an EDA and an external device (e.g., a printer) • re-charges the battery in the EDA • re-charges a standard capacity or extended capacity spare battery.

  • Page 121: Charging The Spare Battery

    Accessories 5 - 9 Charging the Spare Battery Insert a spare battery to begin charging: Lift the battery release lever. Battery Release Lever Extended Capacity Battery Shown Inserting the Spare Battery Figure 5-9 Insert the spare battery in the spare battery charging slot in the cradle with the charging contacts facing up and to the rear of the cradle.

  • Page 122: Charging Temperature

    5 - 10 MC70 User Guide Charging Temperature Charge batteries in temperatures from 0 C to 40 C (32°F to 104°F). Note that at temperatures above 35 charging is intelligently controlled by the EDA and the charging accessory in order to ensure safe operation and optimize long-term battery life.

  • Page 123: Four Slot Spare Battery Charger

    Accessories5 - 11 Four Slot Spare Battery Charger This section describes how to use the Four Slot Spare Battery Charger to charge up to four MC70 spare batteries. NOTE Use only a Symbol-approved power supply output rated 12 Vdc and minimum 3.33A. The power supply is certified to EN60950 with SELV outputs.

  • Page 124: Battery Charging Indicators

    5 - 12 MC70 User Guide Spare Battery Spare Battery Charging LEDs (4) Four Slot Spare Battery Charger Figure 5-12 Battery Charging Indicators The charger has an amber LED for each battery charging well. See Table 5-3 for charging status indications.

  • Page 125: Magnetic Stripe Reader (Msr)

    Accessories5 - 13 Spare Battery LED Charging Indicators Table 5-3 Indication No spare battery in slot; battery is not charging; battery is not inserted correctly in the charger; charger is not powered. Slow Blinking Amber Spare battery is charging. Solid Amber Charging complete.

  • Page 126: Using The Msr

    Applications User’s Guide). To use the MSR: Attach the MSR to the EDA. Power on the EDA. Install the MC70 Demo application onto the EDA. The demo is available with the SMDK. See the MC70 Integrator Guide for more information. > >...

  • Page 127: Inserting The Eda Into The Trigger Handle

    It increases comfort when using the EDA in scan-intensive applications for extended periods of time. The TRG7000 is intended for use with MC70 WLAN/PAN configurations. Install the cleat onto the EDA before using the trigger handle. For cleat installation and communication setup procedures refer to the MC70 Integrator Guide.

  • Page 128: Using A Cradle

    5 - 16 MC70 User Guide Scanning To scan bar codes: Start the EDA’s scanning application. Aim the EDA at the bar code. Pull the trigger on the handle. The Scan/Decode LED lights and a beep sounds to indicate a successful decode.
  • Page 129 Accessories5 - 17 Inserting the EDA Into the Cradle for Charging Figure 5-18...
  • Page 130 • Provide serial connection through the serial pass-through port for communication with a serial device, such as a host computer. For communication setup procedures, refer to the MC70 Integrator Guide. • Provide USB connection through the USB pass-through port for communication with a USB device, such as a host computer.

  • Page 131: Battery Charging And Operating Power

    Accessories5 - 19 Battery Charging and Operating Power The communication/charge cables can charge the EDA battery and supply operating power. To charge the EDA battery: Connect the communication/charge cable power input connector to the Symbol approved power source. Slide the bottom of the EDA into the connector end of the communication/charge cable and gently press in until it latches into the EDA.
  • Page 132 5 - 20 MC70 User Guide...

  • Page 133: Chapter 6 Maintenance & Troubleshooting

    Maintenance & Troubleshooting Chapter 6 Chapter 6 Maintenance & Troubleshooting Introduction This chapter includes instructions on cleaning and storing the EDA, and provides troubleshooting solutions for potential problems during EDA operation. Maintaining the EDA For trouble-free service, observe the following tips when using the EDA: •...

  • Page 134: Troubleshooting

    Incorrect cable See the system administrator. configuration. Communication Perform setup. Refer to the MC70 Integrator Guide for details. software was incorrectly installed or configured. No sound. Volume setting is Adjust the volume. See Speaker Icon on page 2-3.
  • Page 135 Maintenance & Troubleshooting 6 - 3 Troubleshooting the EDA (Continued) Table 6-1 Problem Cause Solution EDA shuts off. EDA is inactive. The EDA turns off after a period of inactivity. If the EDA is running on battery power, set this period from 1 to 5 minutes, in one-minute intervals.

  • Page 136: Bluetooth Connection

    6 - 4 MC70 User Guide Troubleshooting the EDA (Continued) Table 6-1 Problem Cause Solution The EDA does not Scanning Load a scanning application on the EDA. See the system accept scan input. application is not administrator. loaded. Unreadable bar Ensure the symbol is not defaced.
  • Page 137 Maintenance & Troubleshooting 6 - 5 Troubleshooting Bluetooth Connection (Continued) Table 6-2 Problem Cause Solution Can’t make my You attempted to Reset the phone by removing its battery. Ericsson R520 phone bond with the discoverable. phone, and when the phone presented a “pairing query,”...

  • Page 138: Single Slot Usb/Serial Cradle

    6 - 6 MC70 User Guide Single Slot USB/Serial Cradle Troubleshooting the Single Slot USB/Serial Cradle Table 6-3 Symptom Possible Cause Action LEDs do not light Cradle is not Ensure the power cable is connected securely to both the cradle when EDA or spare receiving power.
  • Page 139 Replace EDA in cradle and retransmit. communication, no cradle during data transmits, or communications. transmitted data was Incorrect cable See the system administrator. incomplete. configuration. Communication Perform setup as described in the MC70 Integrator Guide. software is not installed or configured properly.

  • Page 140: Four Slot Ethernet Cradle

    ActiveSync session. Incorrect cable Ensure the correct cable (Ethernet) is used with the cradle. configuration. Communication Perform setup as described in the MC70 Integrator Guide. software improperly configured. EDA ActiveSync On the EDA, tap > >...

  • Page 141: Vehicle Cradle

    Maintenance & Troubleshooting 6 - 9 Troubleshooting the Four Slot Ethernet Cradle (Continued) Table 6-4 Symptom Cause Solution Battery is not EDA removed from Replace the EDA in the cradle. The standard capacity battery charging. the cradle too (1900 mAh) fully charges in less than four hours. The extended soon.

  • Page 142: Four Slot Spare Battery Charge

    6 - 10 MC70 User Guide Troubleshooting the Vehicle Cradle Table 6-5 Symptom Possible Cause Action No data transmitted, EDA removed from Replace EDA in cradle and retransmit. or transmitted data cradle during was incomplete. communication. No null modem Some external devices require a null modem cable. Retransmit cable was used.

  • Page 143: Cables

    EDA during transmitted data was communications. incomplete. Incorrect cable See the system administrator. configuration. Communication Perform setup as described in the MC70 Integrator Guide. software is not installed or configured properly. Magnetic Stripe Reader Troubleshooting the Magnetic Stripe Reader Table 6-8...

  • Page 144: Trigger Handle

    Incorrect cable See the system administrator. incomplete. configuration. Communication Perform setup as described in the MC70 Integrator Guide. software is not installed or configured properly. Trigger Handle Troubleshooting the Trigger Handle Table 6-9...
  • Page 145 Maintenance & Troubleshooting 6 - 13 Troubleshooting the Trigger Handle Table 6-9 Problem Cause Solution EDA battery does not Trigger Handle is Remove the Trigger Handle from the cradle and reinsert. charge when Trigger not properly Handle is placed in a seated in the cradle.
  • Page 146 6 - 14 MC70 User Guide...

  • Page 147: Appendix A: Technical Specifications

    Technical Specifications Appendix A Appendix A Technical Specifications MC70 Technical Specifications The following tables summarize the EDA’s intended operating environment and technical hardware specifications. Table A-1 EDA Technical Specifications Item Description Physical Characteristics Dimensions 6 in. L x 3 in. W x 1.5 in H 15.3 cm L x 7.6 cm W x 3.7 cm H...
  • Page 148 A - 2 MC70 User Guide Table A-1 EDA Technical Specifications (Continued) Item Description Performance Characteristics ® Intel XScale™ Bulverde PXA270 processor at 624MHz Operating System ® Microsoft Windows Mobile™ 2005 Memory 64MB RAM/128MB ROM Interface/Communications RS-232, USB 1.1 User Environment Operating Temperature 14°F to 155°F / -10°C to 68°C...
  • Page 149 Technical Specifications A - 3 Table A-1 EDA Technical Specifications (Continued) Item Description Voice Communication Integrated Voice-over-IP ready (P2P, PBX, PTT), Wi-Fi™-certified, IEEE 802.11a/b/g direct sequence wireless LAN Wireless PAN Data and Voice Communications Bluetooth Class II, v 1.2 Data Capture Specifications Options 2D imager, 1D linear...
  • Page 150 A - 4 MC70 User Guide Table A-1 EDA Technical Specifications (Continued) Item Description Linear 1D Scanner (SE800HP) Specifications Optical Resolution 0.005 in. minimum element width Roll +/- 30° from vertical Pitch Angle +/- 65° from normal Skew Tolerance +/- 60° from normal Ambient Light Sunlight: 8,000 ft.

  • Page 151: Mc70 Accessory Specifications

    Technical Specifications A - 5 MC70 Accessory Specifications Table A-2 Single Slot USB/Serial Cradle Technical Specifications Feature Description Dimensions 4.3 in. L x 2.3 in. W x 3.2 in. H (10.92 cm L x 5.84 cm W x 8.13 cm H) Weight 6.9 oz (196 g)
  • Page 152 A - 6 MC70 User Guide Table A-4 Four Slot Spare Battery Charger Technical Specifications Feature Description Dimensions 8.25 in. L x 6.0 in. W x 1.7 in. H (20.96 cm L x 15.24 cm W x 4.32 cm H) Weight 13.6 oz (386 g)
  • Page 153 Glossary API. An interface by means of which one software component communicates with or controls another. Usually used to refer to services provided by one software component to another, usually via software interrupts or function calls Aperture. The opening in an optical system defined by a lens or baffle that establishes the field of view. Application Programming Interface.
  • Page 154 Glossary - 2 MC70 User Guide Bit. Binary digit. One bit is the basic unit of binary information. Generally, eight consecutive bits compose one byte of data. The pattern of 0 and 1 values within the byte determines its meaning.
  • Page 155 Glossary - 3 Code 3 of 9 (Code 39). A versatile and widely used alphanumeric bar code symbology with a set of 43 character types, including all uppercase letters, numerals from 0 to 9 and 7 special characters (“-”, “.”, “/”, “+”, “%”, “$” and space). The code name is derived from the fact that 3 of 9 elements representing a character are wide, while the remaining 6 are narrow.
  • Page 156 Glossary - 4 MC70 User Guide Discrete 2 of 5. A binary bar code symbology representing each character by a group of five bars, two of which are wide. The location of wide bars in the group determines which character is encoded; spaces are insignificant. Only numeric characters (0 to 9) and START/STOP characters may be encoded.
  • Page 157 Glossary - 5 Host Computer. A computer that serves other terminals in a network, providing such services as computation, database access, supervisory programs and network control. IDE. Intelligent drive electronics. Refers to the solid-state hard drive type. IEC. International Electrotechnical Commission. This international agency regulates laser safety by specifying various laser operation classes based on power output during operation.
  • Page 158 Glossary - 6 MC70 User Guide IS-95. Interim Standard 95. The EIA/TIA standard that governs the operation of CDMA cellular service. Versions include IS-95A and IS-95B. See CDMA. Key. A key is the specific code used by the algorithm to encrypt or decrypt the data. Also see, Encryption and Decrypting.
  • Page 159 Glossary - 7 Misread (Misdecode). A condition which occurs when the data output of a reader or interface controller does not agree with the data encoded within a bar code symbol. Mobile Computer. In this text, mobile computer refers to the Symbol Series 9000 wireless portable computer. It can be set up to run as a stand-alone device, or it can be set up to communicate with a network, using wireless radio technology.
  • Page 160 Glossary - 8 MC70 User Guide PCMCIA. Personal Computer Memory Card Interface Association. See PC Card. Percent Decode. The average probability that a single scan of a bar code would result in a successful decode. In a well-designed bar code scanning system, that probability should approach near 100%.
  • Page 161 Glossary - 9 Scanner. An electronic device used to scan bar code symbols and produce a digitized pattern that corresponds to the bars and spaces of the symbol. Its three main components are: 1) Light source (laser or photoelectric cell) - illuminates a bar code,;...
  • Page 162 Glossary - 10 MC70 User Guide Symbol Length. Length of symbol measured from the beginning of the quiet zone (margin) adjacent to the start character to the end of the quiet zone (margin) adjacent to a stop character. Symbology. The structural rules and conventions for representing data within a particular bar code type (e.g. UPC/EAN, Code 39, PDF417, etc.).
  • Page 163 Glossary - 11 ignored, because there is no time to retransmit. If UDP is used and a reliable delivery is required, packet sequence checking and error notification must be written into the applications. UPC. Universal Product Code. A relatively complex numeric symbology. Each character consists of two bars and two spaces, each of which is any of four widths.
  • Page 164 Glossary - 12 MC70 User Guide...
  • Page 165 Index Numerics 1-D bar codes ......2-20 ActiveSync 2-D bar codes ......2-20 icon .
  • Page 166 Index - 2 MC70 User Guide turning on ......3-3 single slot USB serial ....5-1, 5-4 bonding, bluetooth .
  • Page 167 Index - 3 main battery charging ......1-4, 1-6 icons installing ....... 1-4 ActiveSync .
  • Page 168 Index - 4 MC70 User Guide speaker icon ......2-1, 2-3 special character key ......2-16 QWERTY keypad .
  • Page 169 Index - 5 waking EDA ......2-24 wall mounting kit, cradle ..... . 1-3 warm boot .
  • Page 170 Index - 6 MC70 User Guide...
  • Page 171 Tell Us What You Think... We’d like to know what you think about this Manual. Please take a moment to fill out this questionnaire and fax this form to: (631) 738-3318, or mail to: Symbol Technologies, Inc. One Symbol Plaza M/S B-4 Holtsville, NY 11742-1300 Attention: Technical Publications Manager IMPORTANT: If you need product support, please call the appropriate customer support number provided.
  • Page 174 Motorola, Inc. One Symbol Plaza Holtsville, New York 11742-1300 http://www.symbol.com 72E-71769-02 Revision A - February 2007...

Table of Contents