Privacy Masking - Interlogix TVE-110 User Manual

• HDD Error: Errors occurred while files were being written to the HDD, no
HDD installed or HDD had failed to initialize.
• Network Disconnected: Disconnected network cable.
• IP Address Conflicted: Conflict with IP address setting.
• Invalid Login: Wrong user ID or password used.
• Video Signal Exception: Poor video quality.
• Record/Capture Exception: No space on the HDD to save recorded files.
To configure exception:
1. Click Configuration
window appears.
2. Select a notification type.
Under Normal Linkage, check one or more of the desired the response
methods:
- Audible warning: Trigger an audible beep when an alarm is detected.
Note: TVE-110/410 do not support audible warning.
- Notify Alarm Recipient: Send a notification or alarm signal to remote
alarm host when an event occurs. The alarm host refers to the computer
installed with remote client software
- Send Email: Send an email with alarm information to a user or users
when an event occurs.
3. Check one or more response options: Audible warning, notify alarm recipient,
send email, and trigger alarm output.
4. Click Save to save the settings.

Privacy masking

You can define an area on screen to remain hidden from view. For example, you
can choose to block the view of a camera when overlooking residential premises.
This hidden area is referred to as privacy masking. Privacy masking cannot be
viewed in live view or recorded mode, and appears as a blank area on the video
image.
40
> Remote Configuration
TVE-110/410/810/1610 H.264 IP Video Encoder User Manual
> Exception. The Exception