Ptz Control - Interlogix TVE-110 User Manual

PTZ control

You can control PTZ cameras from the encoder in live view mode.
Figure 7: PTZ control
Directional buttons: Control the pan and tilt movement
Adjust the speed of the pan and
tilt movement
Connecting the PTZ camera to the encoder
Ensure that the PTZ dome cameras are correctly connected to the RS-485 port
on the encoder back panel. Connect the R- and R+ terminals of the PTZ camera
or PTZ dome to the RS-485 T- and RS-485 T+ terminals respectively.
Configure the RS-485 parameters in the
Configuration > Serial Port Settings
Presets
Presets are previously defined locations of a PTZ dome camera. They allow you
to quickly move the PTZ dome camera to a desired position. Up to 256 presets
can be configured.
To set up a preset:
1. In live view mode, select a preset from the preset list.
2. Use the directional, zoom, focus and iris buttons to position the camera in the
desired preset location.
TVE-110/410/810/1610 H.264 IP Video Encoder User Manual
Control the lens:
Adjust the zoom in/out
Adjust the focus near/far
Adjust the iris open/close
Turn on/off the camera light and wiper
Configuration
> 485 Serial Port
> Remote
menu.
13