Video Loss - Interlogix TVE-110 User Manual

Click Edit. In the
the time periods during the day when motion can be recorded. You can
schedule up to eight time periods in a day. Default is 24 hours.
Click Save to save the settings.
Note: The time periods defined cannot overlap.
5. Click Save to save settings

Video Loss

Video may be lost if the video cable or camera develop a fault or are damaged.
You can set up your encoder to detect video loss and trigger a system
notification.
To configure video loss detection:
1. Click Configuration
Loss. The Video Loss window appears.
2. Select a camera to configure for video loss detection.
3. Check the Enable Video Loss Detection
4. Under the Arming Schedule
video loss detection. The configuration is the same as that for the arming
schedule for motion detection.
5. Select the Linking Method
you of the alarm.
6. Click Save to save the settings.
38
Edit Schedule Time
> Remote Configuration
tab, click
tab. Then select the response method to notify
window select the day of the week and
> Camera Settings
box.
Edit to modify the arming schedule for
TVE-110/410/810/1610 H.264 IP Video Encoder User Manual
> Video