Service Manual Cafitesse 100
4
5
Fig. 1
Thermostat
Disassembly:
•
Carry out the preparations for the
disassembly of the boiler cover (1). (Fig. 1)
(refer to the previous page)
•
Disconnect the flexi main cable harness
contacts from the thermostat (2). (Fig. 1)
•
Withdraw the thermostat with support (3)
from the boiler cover. (Fig. 1)
•
Withdraw the thermostat sensor (4) from
the protective tube (5). (Fig. 1)
5A - 8
Functions - Water System
6
2
Assembly:
•
Assembly is done in the reverse order.
•
When mounting the thermostat, wind the
sensor wire from the sensor side approx.
three or four times.
•
Position the wound part of the sensor wire
in the recess of the cover (6) underneath
the thermostat. (Fig. 1)
•
Insert the thermostat sensor deep into the
protective tube (as far as the stop).
1
3
07.2004