Cover With Heating Plate - Douwe Egberts Cafitesse 100 Service Manual

Service Manual Cafitesse 100
G.7.1 Cover with Heating Plate
Installation of the kit 'cover with heating
plate'
Preparation:
• Switch off the dispenser and disconnect it
from the mains supply.
• Disconnect the dispenser from the water
supply.
• Loosen the screw (2) and remove the
operating panel cover (1). (Fig. 1)
• Withdraw the glass cover and the
advertising panel (3) towards the side.
(Fig. 1)
CAUTION: When the front cover is made
of glass, there is the danger of
being injured due to
unauthorized handling or
breaking of the glass.
• Remove the cooling compartment lid (4).
(Fig. 1)
• Remove the housing cover (5). (Fig. 1)
• Remove the air chute (6). (Fig. 1)
• Remove the turn/lift support with the cup
carrier (7), the drip grid (8), the drip tray (9)
and the pot carrier (10). (Fig. 1)
07.2004
2
1
3
x x
x x
x
x x x x
x x x x
x x
S T
O P
8
Fig. 1
Functions - Housing
4
5
6
7
10
9
5G - 5