Function: Operating Panel Board - Douwe Egberts Cafitesse 100 Service Manual

Service Manual Cafitesse 100
K.3.4 Function: Operating Panel Board
• The operating panel board (2) is connected
to the control via the operating panel cable
harness (1) and the counter cable harness
(10). (Fig. 1)
This guarantees the data transfer when
programming and when delivering
beverages.
• The following components are situated on
the operating panel board (Fig. 1):
ST 17 (11)
- connection for control (cable harness
counter)
ST 20 (3)
- connection for control (cable harness
operating panel)
Selector button (4)
- when these are actuated, the control
receives a signal for beverage delivery.
Stop button (5)
- Each beverage delivery is stopped.
BU 4 (6)
- connection for low temperature and
empty indication
BU 1 (7)
- connection for Service Device to
programme the dispenser
Key switch (8)
- for reading and resetting the counter
when the kit 'key switch' is installed
Counter display (9)
- indicates the number of beverage
portions delivered. The display can be
switched off via the programming (see
chap. 4)
07.2004
Functions - Power Supply and Control
6
9
8
2
5
Fig. 1
7
4
11 10
1
3
5K - 15