Reading And Resetting Counters - Douwe Egberts Cafitesse 100 Service Manual

Service Manual Cafitesse 100
Reading and resetting the counters
for Cafitesse 120
Position OFF =
Position ON =
Position 0000 =
The counter registers the respective number of
button activations.
(1) ESPRESSO (cup) or COFFEE (cup or pot)
(2) ESPRESSO (cup) or COFFEE (cup or pot)
(3) ESPRESSO (cup)
1.) Display mode ON
(to be set by the service technician)s
• The display is switched on and always
indicates the number of delivered espresso
cups (button 3).
• Turn the key switch (4) to position OFF.
(Fig. 1)
• To read the number of deliveries for button
(1), press the STOP button. (Fig. 1)
• To read the number of deliveries for button (2),
press button (2). (Fig. 1)
2.) Display mode Off
(to be set by the service technician)
• The display is switched off during delivery,
however, the counter registers the number of
deliveries.
• Turn the key switch (4) to OFF. (Fig. 1)
• Switch off the main switch, wait approx. 5-6
sec., and switch it on again.
• The display is switched on for max. 10 sec.
• The display indicates the counter value for
delivered espresso cups.
4 - 22
delivery disabled,
button locked
delivery enabled
allows counter reset
4
OFF
ON
(Cafitesse 120)
Fig. 1
OFF
(Cafitesse 110/120)
Fig. 2
• To read the number of deliveries for button
(2), press button (2). (Fig. 1)
• To read the number of deliveries for button
(1), press the STOP button. (Fig. 1)
• In case that not all values could be read in
time, the procedure must be repeated.
• Resetting the counter:
Espresso delivery:
Turn the key switch to position "0000".
Deliveries for button (2):
Turn the key switch to position "0000" and
press button (2).
Deliveries for button (1):
Turn the key switch to position "0000" and
press the STOP button.
Programming
1
xxxxx
2
xxxxx
3
STOP
xxxxx
ON
07.2004