Service Manual Cafitesse 100
G Housing
G.1 Adjustments
–
G.2 Disassemblies
G.2.1 Disassembly of the Front Part
Preparation:
•
Switch off the dispenser and disconnect the
mains supply.
•
Disconnect the dispenser from the water
supply.
Disassembly:
•
Remove the operating panel cover (1) with
the screw (2). (Fig. 1)
•
Remove the front cover and the advertising
panel towards the side.
CAUTION:
When the front cover is made
of glass, there is the danger of
being injured due to
unauthorized handling or
breakage of the glass.
•
Remove the cooling compartment lid (8).
(Fig. 1)
•
Remove the housing cover (9). (Fig. 1)
•
Remove the air chute (10). (Fig. 1)
•
Remove the rear wall (3). (Fig. 1)
•
Loosen the cables (4, 5, 6, 7) at the
control. (Fig. 1)
•
Remove the fan (11). (Fig. 1)
•
Remove the fan console (12). (Fig. 1)
•
Remove the metal air supply channel (13).
(Fig. 1)
•
Remove the shielding cover (14). (Fig. 1)
•
Withdraw the temperature sensor.
•
Remove the 2 screws (15). (Fig. 1)
•
Remove the tension rod (16), holding the
front part tightly. (Fig. 1)
•
Remove the 4 cable harnesses towards the
front.
•
Remove the outlet hose (17). (Fig. 1)
•
Hold the front part (18) with both hands
and and unhook it. (Fig. 1)
07.2004
8
2
1
11
12
13
xx
xx
x
x x
xx
x x
xx
x
x
S T
O P
14
Fig. 1
Functions - Housing
9
4
6
7
5
10
3
16
18
15
x x
x x
x
x x
x x
x x
x x
x
x
S T
O P
17
5G - 1