Host Serial Response Time-Out (Rs-232) - Symbol LS 9100 Product Reference Manual

Parameters

Host Serial Response Time-out (RS-232)

This parameter specifies how long the scanner waits for an ACK
or NAK before determining that a transmission error has
occurred. This only applies when in one of the ACK/NAK
Software Handshaking modes.
The delay period can range from 0.0 to 9.9 seconds in .1 second
increments. After scanning the bar code below, scan two bar
codes from Numeric Bar Codes beginning on page 5-160 to set
the desired time-out.
HOST SERIAL RESPONSE TIME-OUT
5-37