LS 9100 Product Reference Guide
Decode Redundancy for UPC/EAN without
Supplementals
With Autodiscriminate UPC/EAN Supplementals selected, this
option adjusts the number of times a symbol is decoded before
transmission. The range is from two to 30 times. Ten or above
is recommended when decoding a mix of UPC/EAN symbols
with and without supplementals.
Scan the bar code below to select a a decode redundancy value.
Next scan two bar codes from
Numeric Bar Codes beginning on
page 5-160
that represent the desired number of times. For
single digit numbers, include a leading zero. If you make an
error, or wish to change your selection, scan
CANCEL on page
5-170.
DECODE REDUNDANCY
for UPC/EAN without
SUPPLEMENTALS
5-112