Die übersetzte Version dieser Kurzübersicht finden Sie auf der CD-ROM zum LS4278 oder auf der folgenden Website. Podrá encontrar la versión traducida de esta guía en el CD del LS4278 o bien en la siguiente página Web. Para obter uma versão traduzida deste guia, consulte o CD do LS4278 ou visite o site abaixo.
Introduction The LS4278 scanner combines excellent scanning performance and advanced ergonomics to provide the best value in a lightweight laser scanner. Whether used as a hand-held scanner or in hands-free mode in a stand, the scanner ensures comfort and ease of use for extended periods of time. Before programming the scanner, scan the...
Low/medium/high beeps Power up. High beep A bar code symbol was decoded (if decode beeper is enabled). Four long low beeps A transmission error was detected in a scanned symbol. The data is ignored. This occurs if a unit is not properly configured.
LS4278 Quick Reference Guide Beeper Sequence Indication Low/high beeps Bluetooth connection established. High/low beeps Bluetooth disconnection event. Long low/long high beeps Page timeout; remote device is out of range/not powered. Long low/long high/long low/long high Connection attempt was rejected by remote device.
Refer to the Product Reference Guide for more information. Bar code symbol is unread- Check the symbol to ensure it is not defaced. able. Try scanning test symbols of the same bar code type. Distance between scanner Move the scanner closer to or further from the and bar code is incorrect.
Refer to the Product Reference Guide for more information. Programming Bar Codes Following are some frequently used programming bar codes. Note: For additional host types, refer to the LS4278 Product Reference Guide, p/n 72E-69834-xx, available on the LS4278 CD, or on the Symbol website: http://www.symbol.com/manuals. Set Defaults Scan SET DEFAULTS to set all parameters to their default values.
Scanning Modes (continued) MULTI-LINE SMART RASTER MULTI-LINE ALWAYS RASTER (Default) Host Types If a Synapse cable is used (i.e., part number STIxx-xxxx), the scanner autodetects the Synapse cable and there is no need to scan bar codes to enable the Synapse host. If a USB interface is used, the scanner autodetects the USB and defaults to the HID keyboard interface.
LS4278 Quick Reference Guide Country Keyboard Types (Country Codes) NORTH AMERICAN (Default) FRENCH Windows FRENCH CANADIAN Windows 95/98 FRENCH CANADIAN Windows XP/2000 GERMAN Windows SPANISH Windows ITALIAN Windows...
Page 11
Country Keyboard Types (Country Codes- continued) SWEDISH Windows UK ENGLISH Windows JAPANESE Windows PORTUGUESE-BRAZILIAN Windows...
PORT 5B PORT 9B Wand Emulation Host Type SYMBOL WAND Many Wand hosts require input as Code 39 data. Scan the following bar codes to enable or disable transmission of data to the Wand host as Code 39 data. ENABLE CONVERT TO CODE 39 FOR WAND HOST...
LS4278 Quick Reference Guide Radio Communications Host Types Scan a bar code below to choose how the scanner connects to a remote device. Scan Cradle Host if connecting to the STB4278 cradle. CRADLE HOST SERIAL PORT PROFILE (MASTER) SERIAL PORT PROFILE (SLAVE)
Note: Unlocked Pairing Mode is supported in single Point-to-Point mode only. Refer to the Product Reference Guide for more information. UNLOCKED PAIRING MODE (Default) LOCKED PAIRING MODE Pairing Methods There are two pairing methods. The default method pairs (connects) the scanner and cradle when the pairing bar code on the cradle is scanned.
• Reduce or eliminate vibration Regulatory Information All Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Any changes or modifications to Symbol Technologies equipment, not expressly approved by Symbol Technologies, could void the user's authority to operate the equipment.
•Italy requires a user license for outside usage. Statement of Compliance Symbol Technologies, Inc., hereby, declares that this device is in compliance with the essential requirements and other relevant provisions of Directives 1999/5/EC, 89/336/EEC and 73/23/EEC. Declaration of Conformities may be obtained from http://www2.symbol.com/doc/.
Scanner Labeling Waste Electrical and Electronic Equipment (WEEE) English: For EU Customers: All products at the end of their life must be returned to Symbol for recycling. For information on how to return product, please go to: http://www.symbol.com/environmental_compliance. Dansk: Til kunder i EU: Alle produkter skal returneres til Symbol til recirkulering, når de er udtjent. Læs oplysningerne...
Page 19
Si desea más información sobre cómo devolver un producto, visite: http:// www.symbol.com/environmental_compliance. Français : Clients de l'Union Européenne : Tous les produits en fin de cycle de vie doivent être retournés à Symbol pour recyclage. Pour de plus amples informations sur le retour de produits, consultez : http://www.symbol.com/ environmental_compliance.
Call Center: +46 8 445 29 29 (international) Latin America 1-800-347-0178 (Inside United States) Sales Support +1-561-483-1275 (Outside United States) For the latest version of this guide go to: http://www.symbol.com/manuals. 72-69835-01 Revision A - October 2005 Symbol Technologies, Inc. One Symbol Plaza Holtsville, N.Y. 11742-1300...