Chapter 4. Programming; Defaults - Symbol LS 9100 Product Reference Manual

Chapter 4
Programming

Defaults

The LS 9100 is shipped with the default settings listed on the
next few pages. These default values are stored in non-volatile
memory (Flash) and are preserved even when the scanner is
powered down. You can change these default values by
scanning the appropriate bar codes included in this manual.
These new values will replace the standard default values in
memory. The default parameter values can be recalled by
scanning the SET DEFAULT bar code.
The definition of each parameter is provided with the
corresponding programming bar code(s) on the page indicated
in the following default tables.
4-1