Time-Out Between Decodes, Different Symbols - Symbol LS 9100 Product Reference Manual

LS 9100 Product Reference Guide

Time-out Between Decodes, Different Symbols

This parameter sets the minimum time between decodes of
different symbols. It is programmable in 0.1 second increments
from 0.0 to 9.9 seconds.
Scan the bar code below, then scan two bar codes from Numeric
Bar Codes beginning on page 5-160, the first representing
seconds, the second tenths of seconds. If you make an error, or
wish to change your selection, scan CANCEL on page 5-170.
TIME-OUT BETWEEN DIFFERENT SYMBOLS
5-96