Symbol LS 5800 Quick Reference
  1. Manuals
  2. Brands
  3. Symbol Manuals
  4. Barcode Reader
  5. LS 5800
  6. Quick reference
Symbol LS 5800 Quick Reference

Symbol LS 5800 Quick Reference

Hide thumbs Also See for LS 5800:
Table of Contents

Advertisement

Quick Links

See also: Quick Reference Manual
RS 2200/3200 Series
LS 5700/LS 5800
Quick Reference

Advertisement

Table of Contents
loading

Related Manuals for Symbol LS 5800

Summary of Contents for Symbol LS 5800

  • Page 1 RS 2200/3200 Series LS 5700/LS 5800 Quick Reference...
  • Page 2 © 1997 SYMBOL TECHNOLOGIES, INC. All rights reserved. Symbol reserves the right to make changes to any product to improve reliability, function, or design. Symbol does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.

  • Page 3: Product Description

    Except for mounting orientation and installation, both scanners are similar in most other areas. Unless otherwise noted, this guide will apply equally to the LS 5700 and LS 5800. LS 5700 The LS 5700 is designed to rest on top of the counter.
  • Page 4 LS 5800 The LS 5800 mounts in the counter with the face of the scanner flush with the counter top. The LS 5800 is available with a stainless steel top cover and scratch-proof scan window option. It is well suited for the most demanding applications, where hard goods such as bottles and cans are dragged across the scanner.

  • Page 5: Indicator Lights

    Operating the LS 5700/LS 5800 Scanner Turning On The LS 5700/LS 5800 does not have an on/off switch. As soon as you plug it in, it’s ready to scan. Indicator Lights Notice the red and green indicator lights inside the scan window.
  • Page 6 Controls The LS 5700 has a push button near the top right corner. This push button is to both adjust the volume and tone of the beeper, and to wake the scanner from its rest or sleep mode. When the scanner is operating, depress this button to adjust the volume/tone.
  • Page 7 Connectors Removing the connector cover allows access to the scanner’s connectors. EAS Antenna Power Host Port Scanner Port RS-232 Port Connector Cover Quick Reference...
  • Page 8 Generally, the technical person in charge of scanning customizes the scanner for your particular application using programming bar codes found in the LS 5700/LS 5800 Product Reference Guide. If you are programming the scanner yourself, consult the Product Reference Guide for more information.

  • Page 9: Scanning A Bar Code

    Scanning a Bar Code For the best scanning performance, the counter top or surface area covered by the active scan area should be free of any de- signs (e.g. stripes or patterns). Ideally, that area should be a light solid color. To scan a bar code, move an item through the active scan area in the direction of the arrows, with the bar code label facing the scan window.
  • Page 10 Product Reference Guide. This mode saves power and extends the life of the scanner. The LS 5700/LS 5800 automatically awakens as soon as you pass a bar coded item past the scan window. The LS 5700 also has a programmable shut-down sleep option that turns off the laser and the motor.

  • Page 11: Maintenance

    Maintenance Cleaning the exit window is the only maintenance required. A dirty or scratched window may affect scanning activity. • Remove any dirt particles with a damp cloth. • Wipe the window with a tissue moistened with ammonia/water. LS 5700 To change or clean the exit window: •...
  • Page 12 LS 5800 To change or clean the exit window: • Insert a coin into the large screw heads on the front of the scanner and turn counter-clockwise. • Lift off the window. To Clean: • Wipe clean the underside of the upper window.
  • Page 13 Test To confirm that your scanner is working properly, scan the UPC-A bar code below. 1234599999 Quick Reference...

  • Page 14: Some Helpful Bar Codes

    Select the beeper volume that best suits your operation. Scanning these bar codes is the only way to change the volume on the LS 5800. To change the volume on the LS 5700, you can either scan one of the volume bar codes, or use the push button on the top right hand corner of the scanner.

  • Page 15: Low Volume

    Beeper Volume LOW VOLUME Quick Reference...
  • Page 16 Beeper Volume MEDIUM VOLUME Quick Reference...

  • Page 17: High Volume

    Beeper Volume HIGH VOLUME Quick Reference...

  • Page 18: Beeper Frequency

    Beeper Frequency LOW FREQUENCY Quick Reference...

  • Page 19: Medium Frequency

    Beeper Frequency MEDIUM FREQUENCY Quick Reference...

  • Page 20: High Frequency

    Beeper Frequency HIGH FREQUENCY Quick Reference...

  • Page 21: Regulatory Information

    Regulatory Information Scanner Labeling US CLASS IIa LASER PRODUCT AVOID LONG TERM VIEWING OF DIRECT LASER LIGHT VORSICHT CAUTION - EC CLASS 1 LASER PRODUCT LASERSTRAHL LASER LIGHT TIME BASIS: 1000S WENN WHEN OPEN APPAREIL LASER DE CLASSE 1 ABDECKUNG DO NOT BASE DE TEMPS: 1000S GEDEFFTNET...

  • Page 22: Radio Frequency Interference Requirements

    Regulatory Information Radio Frequency Interference Requirements This device must operate in compliance with Federal Communications Commission (FCC) Rules and Regulations Part 15. This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 23 Regulatory Information Class I Symbol U.S. Federal (FDA)/IEC825/EN60825 Class 1 laser products use low power visible or IR lasers. Class 1 laser devices are not considered to be hazardous when used for their intended purpose. To comply with U. S. Federal and International regulations, the following statement is required.:...
  • Page 24 Regulatory Information In accordance with Clause 5, IEC 0825 and EN60825, the follow- ing information is provided to the user: ENGLISH CLASS 1 CLASS 1 LASER PRODUCT CLASS 2 LASER LIGHT DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT DANISH KLASSE 1 KLASSE 1 LASERPRODUKT...
  • Page 25 Regulatory Information GERMAN KLASSE 1 LASERPRODUKT DER KLASSE 1 KLASSE 2 LASERSTRAHLEN NICHT DIREKT IN DEN LASERSTRAHL SCHAUEN LASERPRODUKT DER KLASSE 2 HEBREW ITALIAN CLASSE 1 PRODOTTO AL LASER DI CLASSE 1 CLASSE 2 LUCE LASER NON FISSARE IL RAGGIOPRODOTTO AL LASER DI CLASSE 2 NORWEGIAN KLASSE 1 LASERPRODUKT, KLASSE 1...
  • Page 26 This product is covered by one or more of the following U.S. and foreign Patents: U.S. Patent No. 4,360,798; 4,369,361; 4,387,297; 4,460,120; 4,496,831; 4,593,186; 4,603,262; 4,607,156; 4,652,750; 4,673,805; 4,736,095; 4,758,717; 4,816,660; 4,845,350; 4,896,026; 4,897,532; 4,923,281; 4,933,538; 4,992,717; 5,015,833; 5,017,765; 5,021,641; 5,029,183; 5,047,617; 5,103,461; 5,113,445; 5,140,144; 5,142,550;...

This manual is also suitable for:

Ls 5700

Table of Contents