Host Serial Response Time-Out - Symbol LS 4071 Product Reference Manual

LS 4071 Product Reference Guide
RS-232C Parameters

Host Serial Response Time-out

This parameter specifies how long the base waits for an ACK, NAK or CTS
before determining that a transmission error has occurred. This only applies
when in one of the ACK/NAK Software Handshaking modes, or RTS/CTS
Hardware Handshaking option.
The delay period can range from 0.0 to 9.9 seconds in .1 second increments.
After scanning the bar code below, scan two numeric bar codes beginning on
page 5-98. If you make an error, or wish to change your selection, scan
CANCEL on page 5-100.
HOST SERIAL RESPONSE TIME-OUT
5-92