Time-Out Between Decodes, Different Symbols - Symbol LS 6000i Product Reference Manual

LS 6000i Series Product Reference Guide
Time-out Between Decodes,
Different Symbols
This parameter sets the minimum time between
decodes of different symbols. It is programmable in 0.1
second increments from 0.0 to 9.9 seconds.
Scan the bar code below, then scan two numeric bar
codes beginning on page 5-138, the first representing
seconds, the second tenths of seconds. If you make an
error, or wish to change your selection, scan CANCEL
bar code on page 5-143.
TIME-OUT BETWEEN DIFFERENT SYMBOLS
5-62