Fitting The Mounting Rails - Viessmann VITOSOL 200 Installation Instructions Manual

Vertical rooftop installation
Fitting roof hooks for plain tile cover

Fitting the mounting rails

Turn T-slot bolts 90° for all installation steps.
(cont.)
1. Mark the position of each roof hook
in accordance with the dimensions
shown in the illustration on
page 24.
2. Remove tiles from the roof hook
area.
3. Hook the roof hooks onto the bat-
tens and position and align on top
of the tile below.
4. Secure the roof hooks to the bat-
tens.
5. Cover the roof; trim tiles to suit with
an angle grinder; trim approx.
30 mm off the tiles.
27