Viessmann VITOSOL 200 Installation Instructions Manual page 49

Water connections
1. Insert the connection pipes as far
as possible, then secure them
with hose clips.
2. Fit the elbow onto the return con-
nector.
3. Fit the tee onto the flow connec-
tor.
4. Insert the sensor well into the tee,
holding the tee tightly.
5. Insert the strain relief fitting into
the sensor well.
6. Insert the collector temperature
sensor as far as possible into the
sensor well and secure with PG
thread.
(cont.)
7. Insert the U-pipe as far as possi-
ble, then secure it with profile
clips.
8. Insert the support sleeves into the
pipework of the solar circuit.
Make the connection between the
collector array and pipework of
the solar heating circuit.
9. Check the system pressure and
test for leaks.
10. Fit the thermal insulation and join
its cut faces with adhesive.
11. Fit and secure on the thermal
insulation cap.
"Vitosol" service instruc-
tions.
49