Fitting The Mounting Rails And Connecting Chamber - Viessmann VITOSOL 300-T Installation Instructions Manual

Installation on flat roofs
9. Undo the screws on the bracing rail
and insert the rail screws into the
supports.
Tighten the rail.

Fitting the mounting rails and connecting chamber

A Retaining plate
1. Insert the mounting rails into the
clamping brackets in accordance
with the dimensions given in the
diagram on page 20 and secure.
2. Click the connecting chamber into
the retaining plates and clamping
brackets.
(cont.)
3. Align the connecting chamber.
The tube holders on the mounting
rails must be in line with those in
the connecting chamber; where
necessary, align with a piece of
string.
4. Tighten all screws.
23