Table of Contents
Advertisement
Fitting mounting rails
Turn the tee bolts 90° for all installation steps.
A Roof hooks or clamping bracket
1. Secure the connecting parts to the
mounting rails.
2. Align the mounting rails and secure to
the roof hooks.
18
1.
2.
3.
3. Hook the mounting plates into the
lower mounting rails in accordance
with the following dimensions:
■ for standard snow loads, see the
dimensions on page 8 and 11
■ for higher snow loads, see the illus-
tration on page 10 and 14.
Advertisement
Table of Contents
