Replacing A Staple Kit - Konica Minolta bizhub C3850 User Manual

2.2 Replacing consumables
14
Close the Right Door.
% If the Right Door is not closed, check that the Fusing Unit is installed correctly.
15
Select [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Life] - [New Release]
- [Fusing Unit], then reset the counter.
2.2.8

Replacing a Staple Kit

1
Rotate the Finisher 90 degrees.
2
Open the Finisher Cover.
[Maintenance/Troubleshooting]
2
2-26