Adjustment
3.4.3
03 Punch Adjustment \ 01 Vertical Position Adj. (FS-520/FS-607)
Perform this adjustment for the center position of punch holes operated by the Punch Kit PK-512/PK-513.
1
Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2
Touch [04 Finisher Adjustment], [03 Punch Adjustment], and then [01 Vertical Position Adj.].
The Vertical Position Adjustment Screen is displayed.
3
Touch [COPY] tab.
The Copy Screen will be displayed.
4
Load the desired size of paper to be adjusted on a tray, specify Punch, then press [Start] on the control
panel.
A sample pattern will be output.
5
Check the value of misalignment (a) between the center-fold line and punch position.
6
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Vertical Position Adjustment Screen will be restored.
7
Display the required size key using up/down arrow keys, and touch it.
bizhub PRO C5501
[1]
a
[2]
3
3-23