Paper Setting Outlines; Setting Items In Paper Setting - Konica Minolta bizub pro c5501 User Manual

Paper setting
2 Paper setting
2.1

Paper setting outlines

This section provides information on, and instructions for, settings the items in the User Setting.
This machine provides Paper Setting mode in order to perform printing job according to the characteristics
of paper to be used, by specifying conditions such as Paper Name, Size, Paper Type, Weight, Both Sides
Adjustment, Process Adjustment, Speed Setting, Hole-Punch, Color Paper, and Air Assist.
Paper conditions as mentioned above are supposed to be predefined, and can be edited and even deleted
at any time. (Paper Setting in User Setting on Utility Screen)
Recall the predefined conditions for each tray, and modify them, if necessary, in order to satisfy the
environmental conditions (temperature, humidity, condition of paper, etc.) at that time. (Paper Setting on
Copy Screen or Machine Status Screen)
2.1.1

Setting items in paper setting

Paper type
Select one of the following seven types.
- High Quality, Plain, Color Specific, Coated-GL, Coated-ML, Coated-GO, Coated-MO
See page 2-4 for details of paper type specifications.
Paper name
You can use maximum 22 characters.
Weight
Select one of the following eight types.
- 64-74 g/m
257-300 g/m
The unit display for paper weight can be changed. Touch [Unit Change] to switch between the options.
See page 2-4 for details of relation between paper type and weight.
Both sides adj.
Specify the Vertical zoom, Horizontal zoom, Up/Down shift amount, Right/Left shift amount, and Registration
Loop for both front and back pages.
- Vertical zoom: Front -100 to +100, Back -80 to +20 (in 0.1% increments)
- Horizontal zoom: -100 to +100 (in 0.1% increments)
We recommend you performing this adjustment every day or every time the tray is loaded with different type
of paper, because the coefficient of contraction varies according to the paper type, brand, or the difference
in temperature and humidity of paper repository.
The Horizontal zoom of the Back side is specified with 01 System Setting of the Machine Admin. Setting.
This adjustment can be performed using a chart in Paper Setting accessed only from Copy Screen and
Machine Status Screen.
Process adj.
Usually, this adjustment is not available. Contact your service representative for detail.
Collective adjustment of the process adjustment for all tray is specified with the Machine Admin. Setting.
bizhub PRO C5501
2 2
, 75-80 g/m , 81-105 g/m
2
2 2
, 106-135 g/m , 136-162 g/m
2 2
, 163-209 g/m , 210-256 g/m
2
2
,
2-3