Expert Adjustment \ 02 Erase Adjustment - Konica Minolta bizub pro c5501 User Manual

Machine administrator setting
6.2.12

05 Expert Adjustment \ 02 Erase Adjustment

Specify the detailed setting for erase operations used when reading the originals.
01 Non-Image Area Erase
Select to delete or not the outside area of the original from the following three ways:
- Erase Outside of Original:
Set the machine any time to delete the outside area of the original.
- On - APS/AMS Only:
Set the machine to delete the outside area of the original only when APS or AMS is activated.
- Except Orig. Glass (1:1):
Set the machine to delete the outside area of the original except when copying in real size on the original
glass.
02 Erase Operating Setting
Use this function to select the erase mode, and set the density level of the original (five levels). The default
setting is Auto.
03 ADF Frame Erase
Set Frame Erase to function anytime when copying in ADF mode, and set the amount of the outside area to
be deleted.
1
Follow the procedure on page 6-3 to display the Machine Administrator Setting Menu Screen.
2
Touch [01 System Setting], [05 Expert Adjustment], and then [02 Erase Adjustment].
The Erase Adjustment Menu Screen will be displayed.
3
Touch [01 Non-Image Area Erase].
– Touch the desired key to highlight it.
bizhub PRO C5501
6
6-19