Scanner Adjustment \ 03 Fd-Mag. Adjustment - Konica Minolta bizub pro c5501 User Manual

Adjustment
3.1.7

02 Scanner Adjustment \ 03 FD-Mag. Adjustment

Perform this adjustment to control the magnification to the direction of paper feed in scanning the original
with original glass.
To specify FD-Mag. Adjustment
1
Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2
Touch [01 Machine Adjustment], [02 Scanner Adjustment], and then [03 FD-Mag. Adjustment].
The FD-Mag. Adjustment Screen will be displayed.
3
Touch [COPY] tab.
The Copy Screen will be displayed.
4
Select A3 w/11" e 17" w paper, then press [START].
The sample pattern will be output.
5
Check the magnification in the direction of paper feed by comparing the output and the original.
6
If the desired result cannot be obtained, touch the [ADJUSTMENT] tab.
The Scanner FD-Mag. Adjustment Screen will be restored.
bizhub PRO C5501
3
3-15