Power Save Setting - Konica Minolta bizub pro c5501 User Manual

5
5.2.12

07 Power Save Setting

Specify Auto Low Power or Auto Shut Off when setting the Power Save mode manually, and select the
interval of time that must elapse before Auto Low Power and Auto Shut Off.
- Auto Low Power:
OFF/ 5 min. / 10 min. / 15 min. / 30 min. / 60 min. / 90 min. / 120 min. / 240 min.
- Auto Shut Off:
OFF/ 1 min. / 30 min. / 60 min. / 90 min. / 120 min. / 240 min.
1
Follow the procedure on page 5-3 to display the User Setting Menu Screen.
2
Touch [01 System Setting], and then [07 Power Save Setting].
3
Specify the Power Save mode to be set manually by pressing [Power Save] on the control panel, by
selecting [Auto Low Power] or [Auto Shut Off].
4
Select the interval of time that must elapse before turning to Auto Low Power automatically.
The initial setting is OFF.
– Touch the arrow keys (+) and (,) in each area to select a specific waiting period before activating
Auto Low Power.
5
Select the interval of time that must elapse before turning to Auto Shut Off automatically.
The initial setting is 1 minute.
– Touch the arrow keys (+) and (,) in each area to select a specific waiting period before activating
Auto Shut Off.
– If the Auto Shut Off function is disabled, select [---min.].
6
Touch [OK] to complete the setting.
– To cancel the change, touch [Cancel].
In either case, the System Setting Menu Screen will be restored.
7
If further changes are required, touch the desired key.
5-16
User setting
bizhub PRO C5501