Konica Minolta bizub pro c5501 User Manual page 54

3
7
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Horizontal Position Adjustment Screen will be restored.
8
Touch [+ <--> -] to specify the value to be positive or negative. Use the touch panel keypad to enter the
desired adjustment value, then touch [<<SET].
Available range: -50 (wide) to +50 (narrow), 1 step = 0.1 mm
9
Repeat the adjustment steps from 3 to 8 until the desired result is obtained.
10
If adjustment in any other tray is required, repeat steps from 3 to 9.
11
Touch [Return] to restore the Adjustment Menu Screen.
3-26
Adjustment
bizhub PRO C5501