Konica Minolta bizub pro c5501 User Manual page 25

Paper setting
15
Select the paper size.
– To specify the standard size, touch [Standard] on the link size information to display the Standard
Size Setting Screen.
Select the desired size key, then touch [OK] to complete the setting.
– To specify the custom size, recall the custom size registered from Copy Screen or Machine Status
Screen. Touch [Custom] on the link size information to display the Size Recall Screen. Select the
desired size key, then touch [OK] to complete the setting.
Custom sizes can be registered on the Copy Screen, or by selecting [Paper Setting] > [Size Setting]
the Machine Status Screen. Please refer to the User's Guide - Copier for more information.
16
Touch [OK] on the Input Condition Screen.
– The Paper Setting Screen will be restored.
Touch [Reset] to reset to the initial setting.
17
Touch [Close] on the Paper Setting Screen.
– Touch [Exit] to return to the Copy Screen.
!
Detail
Chart adjustment is available from the Paper Setting on the Copy Screen or Machine Status Screen
only.
Paper Setting of User Setting does not provide this function.
Contact your service representative for details.
Air assist setting will be effective only when tray 4 of Large Capacity Unit LU-202 is selected.
bizhub PRO C5501
2
2-11