Change A Port Triggering Rule - NETGEAR Nighthawk D7000 User Manual

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
Field
Service Type
Triggering Port
Required Inbound Connection
Service Type
Starting Port
Ending Port
9. Click the Apply button.
Your settings are saved and the rule is added to the Port Triggering Portmap Table on the Port
Forwarding / Port Triggering page.

Change a Port Triggering Rule

You can change an existing port triggering rule.
To change a port triggering rule:
1. Launch an Internet browser from a computer or WiFi device that is connected to the network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Enter the user name and password for the modem router.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
4. Click the OK button.
Description
• Any. This is the default setting and allows any computer on the
Internet to use this service.
• Single address. Restricts the service to a particular computer.
Select the protocol (TCP or UDP) that is associated with the service or
application.
Enter the number of the outbound traffic port that must open the inbound
ports.
Select the protocol (TCP or UDP) that is associated with the inbound
connection.
If you are unsure, select TCP/UDP.
Enter the start port number for the inbound connection.
Enter the end port number for the inbound connection.
Manage Port Forwarding and Port Triggering
286