Remove A Port Triggering Rule - NETGEAR Nighthawk D7000 User Manual

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering page displays.
6. Select the Port Triggering radio button.
The previous figure shows two port triggering rules.
7. In the Port Triggering Portmap Table, select the radio button next to the service or application name.
8. Click the Edit Service button.
The Port Triggering - Services page displays.
9. Change the settings.
For more information about the settings, see
10. Click the Apply button.
Your settings are saved. The changed rule displays in the Port Triggering Portmap Table on the Port
Forwarding / Port Triggering page.

Remove a Port Triggering Rule

You can remove a port triggering rule that you no longer need.
To remove a port triggering rule:
1. Launch an Internet browser from a computer or WiFi device that is connected to the network.
2. Type http://www.routerlogin.net.
Manage Port Forwarding and Port Triggering
287
Add a Port Triggering Rule on page 284.