Change The Traffic Statistics Polling Frequency - NETGEAR Nighthawk D7000 User Manual

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
Field or Column
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
ADSL Link
In addition to the xDSL firmware version, the screen displays the ADSL link information that is
described in this table.
Link Rate
Line Attenuation
Noise Margin
Poll Interval

Change the Traffic Statistics Polling Frequency

You can change the polling frequency or stop traffic polling.
Manage the Modem Router and Monitor the Traffic
Description
The statistics for the WAN (Internet over Ethernet) port, LAN (Ethernet)
ports, WLAN b/g/n port, and WLAN a/n/ac port. For each port, the
screen displays the information that is described in this table.
The link status of the port.
The number of packets that were transmitted on this port since reset
or manual clear.
The number of packets that were received on this port since reset or
manual clear.
The number of packets that collided on this port since reset or manual
clear.
The number of bytes per second that were transmitted on this port
since reset or manual clear.
The number of bytes per second that were received on this port since
reset or manual clear.
The time elapsed since this port acquired the link.
The downstream and upstream link rates in Kbps.
The downstream and upstream Line Attenuation (LATN) in dB. The
LATN expresses the signal quality.
The downstream and upstream Signal-to-Noise Ratio Margin (SNRM)
in dB.The SNRM expresses the signal quality in relation to interference.
The interval at which the statistics are updated in this screen.
248