Change A Port Triggering Rule - NETGEAR D6100 User Manual

AC1200 WiFi DSL Modem Router—Essentials Edition Model D6100
8. Specify a new port triggering rule with a custom service or application as described in the
following table.
Field
Service Name
Service User
Service Type
Triggering Port
Inbound Connection
Connection Type
Starting Port
Ending Port
9. Click the Apply button.
Your settings are saved and the rule is added to the Port Triggering Portmap Table on the
Port Forwarding / Port Triggering screen.

Change a Port Triggering Rule

You can change an existing port triggering rule.

To change a port triggering rule:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net.
Manage Firewall Rules, Port Forwarding, and Port Triggering
Description
Enter the name of the custom service or application.
From the Service User menu, select Any, or select Single address and enter the IP
address of one computer:
• Any. This is the default setting and allows any computer on the Internet to use
this service.
• Single address. Restricts the service to a particular computer.
Select the protocol (TCP or UDP) that is associated with the service or application.
Enter the number of the outbound traffic port that must open the inbound ports.
Select the protocol (TCP or UDP) that is associated with the inbound connection.
If you are unsure, select TCP/UDP.
Enter the start port number for the inbound connection.
Enter the end port number for the inbound connection.
197