Reestablish The Pppoe Or Pppoa Connection - NETGEAR Nighthawk D7000 User Manual

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
Specify an ADSL Connection with a Login Requirement and PPPoA or PPPoE Service
•
• Specify a VDSL Connection with a Login Requirement and PPPoE Service
Specify a Cable or Fiber Connection with a Login Requirement and PPPoE Service
•

Reestablish the PPPoE or PPPoA Connection

If your PPPoE or PPPoA configuration information is correct (see
on page 302), your PPPoE or PPPoA connection is working.
To reconnect if your PPPoE or PPPoA connection does not function:
1. Launch an Internet browser from a computer or WiFi device that is connected to the network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Enter the user name and password for the modem router.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
4. Click the OK button.
The BASIC Home page displays.
5. Select ADVANCED > ADVANCED Home.
The ADVANCED Home page displays.
6. In the Internet Port pane, click the Connection Status button.
The Connection Status page displays.
7. Click the Connect button.
The modem router attempts to reconnect.
If you cannot connect after several minutes, you might be using an incorrect service name, user name,
or password. Or your ISP might not be able to provide an Internet connection. For more information, see
one of the following sections:
• Specify an ADSL Connection with a Login Requirement and PPPoA or PPPoE Service
• Specify a VDSL Connection with a Login Requirement and PPPoE Service
• Specify a Cable or Fiber Connection with a Login Requirement and PPPoE Service
Note Unless you connect manually, the modem router does not authenticate using PPPoE
or PPPoA until data is transmitted to the network.
Diagnostics and Troubleshooting
303
on page 68
Verify the PPPoE or PPPoA Connection
on page 68
on page 57
on page 79
on page 57
on page 79