Add A Custom Qos Rule For A Device - NETGEAR Nighthawk D7000 User Manual

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
8. Specify a new QoS rule for a service or application as described in the following table.
Field
QoS Policy for
Priority
Specified Port Range
Connection Type
Starting Port
Ending Port
9. On the QoS - Priority Rules page, click the Apply button.
The new QoS rule is added to the QoS rules table.
10. On the QoS Setup page, click the Apply button.
Your settings are saved.

Add a Custom QoS Rule for a Device

You can assign a traffic priority to a device on your network.
Description
Enter a name for the QoS rule.
Select the priority (Highest, High, Normal, or Low) that must be
assigned to the service or application.
The priority selections correspond to the queue columns in the QoS
rules table.
Select the protocol (TCP or UDP) that is associated with the service or
application.
If you are unsure, select TCP/UDP.
Enter the start port number for the service or application.
Enter the end port number for the service or application.
Optimize Performance
163