Factory Settings - NETGEAR Nighthawk D7000 User Manual

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000

Factory Settings

You can reset the modem router to the factory default settings that are shown in the following table.
For more information about resetting the modem router to its factory settings, see
Router to Its Factory Default Settings
Table 28. D7000 modem router factory default settings
Feature
Router login
User login URL
User name (case-sensitive)
Login password (case-sensitive)
Internet connection
WAN MAC address
WAN MTU size
Port speed
Local network (LAN)
LAN IP address
Subnet mask
DHCP server
DHCP range
DHCP starting IP address
DHCP ending IP address
DMZ
on page 238.
Default Behavior
www.routerlogin.net (or www.routerlogin.com or 192.168.0.1)
admin
password
Use default hardware address
Determined by the protocol that is used for the Internet
connection (see
Autosensing
192.168.0.1
255.255.255.0
Enabled
192.168.0.2 to 192.168.0.254
192.168.0.2
192.168.0.254
Disabled
Supplemental Information
309
Return the Modem
MTU Concepts on page 99)