Return The Modem Router To Its Factory Default Settings; Use The Reset Button - NETGEAR Nighthawk D7000 User Manual

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
A login window opens.
9. With your recovered password, log in to the modem router.

Return the Modem Router to Its Factory Default Settings

Under some circumstances (for example, if you lost track of the changes that you made to the modem
router settings or you move the modem router to a different network), you might want to erase the
configuration and reset it to factory default settings.
If you do not know the current IP address of the modem router, first try to use an IP scanner application
to detect the IP address before you reset the modem router to factory default settings.
To reset the modem router to factory default settings, you can use either the Reset button on the back
of the modem router or the Erase function. However, if you cannot find the IP address or lost the password
to access the modem router, you must use the Reset button.
After you reset the modem router to factory default settings, the user name is admin, the password is
password, the LAN IP address is 192.168.0.1 (which is the same as www.routerlogin.net), and the DHCP
server is enabled. For a list of factory default settings, see

Use the Reset Button

Note This process erases all settings that you configured in the modem router.
To reset the modem router to factory default settings:
1. On the back of the modem router, locate the Reset button to the right of the left antenna.
Manage the Modem Router and Monitor the Traffic
Factory Settings
238
on page 309.