Change A Port Triggering Rule - NETGEAR Nighthawk RS400 User Manual

Nighthawk AC2300 Cybersecurity WiFi Router Model RS400
• Service Type. Select the protocol (TCP or UDP) that is associated with the service
or application.
• Triggering Port. Enter the number of the outbound traffic port that must open
the inbound ports.
• Connection Type. Select the protocol (TCP or UDP) that is associated with the
inbound connection. If you are unsure, select TCP/UDP.
• Starting Port. Enter the start port number for the inbound connection.
• Ending Port. Enter the end port number for the inbound connection.
8. Click the Apply button.
Your settings are saved and the rule is added to the Port Triggering Portmap Table
on the Port Forwarding / Port Triggering page.

Change a port triggering rule

You can change an existing port triggering rule.
To change a port triggering rule:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering page displays.
5. Select the Port Triggering radio button.
The port triggering settings display.
6. In the Port Triggering Portmap Table, select the radio button for the service name.
7. Click the Edit Service button.
The Port Triggering - Services page displays.
8. Change the settings.
For information about the settings, see Add a port triggering rule on page 160.
Manage Port Forwarding and
Port Triggering Traffic Rules
161 User Manual